Wanted FJ60 Manual (53 Viewers)

[BBrianr]

WTB FJ45 LWB Side Rail HOOKS

I bobbed my 45 LB and have several hooks left over. I am only using 4 hooks on my shortened bed(Bed is now just over 4 ft long)

$20 + ride

Let me know
BBuiltparts@yahoo.com

Thanks
Brian

 

[BBrianr]

Re:Needed-Warn 8274Bumper/mount

I have a 8274 winch mount for a fj40. It is not a complete bumper, but bolts to the top of the frame.
If you are interested, e-mail me at: BBuiltparts@yahoo.com

Thanks
Brian

 

[cruzer]

Stock 40 roll bar.

I have one in CT. I know not close to AZ BUT i can cut it on my chop saw and can be welded backtogether when you get it. I know this is how SOR sells theres. You maybe able to sleeve and weld it also if you find the right size tubing.(www.onlinemetals.com or www.mcmastercar.com) Let me know if you are interested 75.00 bucks plus shipping. Probably not to to bad if i cut the main hoop in half.

Stew

 

[fjcruiser]

'79- '85 mini truck front axle, 4.10 gears

Like the subject says, complete axle assembly with brakes, hubs, etc. I live in Oregon, outside Portland.

 

[Landpimp]

Re:Needed-Warn 8274Bumper/mount

does it look like this?

[quote author=BBrianr link=board=6;threadid=9081;start=msg88965#msg88965 date=1073925347]
I have a 8274 winch mount for a fj40. It is not a complete bumper, but bolts to the top of the frame.
If you are interested, e-mail me at: BBuiltparts@yahoo.com

Thanks
Brian

[/quote]

 

[Landpimp]

late model hard top, door and fender wanted

TTT

 

[southerncruiser62]

Looking for a set of soft half doors

Looking to get a set of soft half doors for my 76' toyota land cruiser, any one out there have a set?

 

[fjcruiser]

WTB FULL roll cage for my 78FJ40

I don't know how good your fab skills are, but here is a great source for cages. I bought the front profile cage from Mark last year. Very nice setup. I also bought the nose guard kit at the same time.
Give him a call, he will help you out.
http://www.metaltechcage.com/productsframeset.htm
Steve

 

[fjcruiser]

Looking for a set of soft half doors

I've got a set. They aren't in the greatest shape. IIRC, there was quite a bit of rust on the pins. I haven't looked at them in quite awhile. If you're interested, I will shoot some pics. Don't know what the shipping would be. I live in Oregon and I see you are in NC.
Let me know,
Steve

 

[fjcruiser]

ARB Rack for an FJ60 wanted

I don't know about the fitment, but this might interest you. Its not an ARB, but...
http://www.cascadecruisers.com/yabbse/index.php?board=3;action=display;threadid=146

 

[bjowett]

Stock FJ40 Radio wanted....

I have several Toyota radios from the late 70's early 80's... I think one is from a 1st gen. mini truck, the other from a 79/80 Corona, both are the small din size, may fit the cruiser? LMK if you have some interest. I also have a factory add on tape player to go with one of them. syncroboy@hotmail.com

 

[Ivan]

Looking for a set of Front Mud Flaps

bump...

 

[Junk]

ABS rings for 95-97 FZJ80 US Spec

Just the rings, can be used so long as not boogered up during removal from old birf.

mike@yourlandcruiser.com

Thanks

 

[tltaylor22]

Re:Looking for a set of Front Mud Flaps

Ivan,
I've got a factory set for a 93 that came off my rig that had non factory running boards. I didn't pay attention when I took them off, do the ones for the front say "landcruiser" on them or are those the backs. I've got all 4. One this the "landcruiser" has a small screw hole in it. I will clean them up today and send you a picture. It was an my list to do today.

Trent
Orem utah 84097

 

[AZFJ]

Stock 40 roll bar.

[quote author=3fj40 link=board=6;threadid=9999;start=msg88807#msg88807 date=1073885112]
WTB a stock 40 roll bar, anyone have one in the AZ area?
[/quote]

..I'm going to put a new one in..This one will go..Where in AZ are you?..I'm up in Kingman!

 

[Pskhaat]

Stock 40 roll bar.

[quote author=AZFJ link=board=6;threadid=9999;start=msg89679#msg89679 date=1074010146]
..I'm going to put a new one in..This one will go..Where in AZ are you?..I'm up in Kingman!
[/quote]

I'm in Scottsdale, but looking for the stocker as I'm going to start building a cage with some of the stock joints

 

[tltaylor22]

Re:Stock 40 roll bar.

I've got a stock roll bar here in Utah. If all you need are the Joints it would be easy enough to cut up and ship.

Trent Taylor
Orem Utah 84097

 

[southerncruiser62]

Looking for a set of soft half doors

if you dont' mind shoot a few picks, is this surface rust or something that could be sanded down, i was just gonna check out there to see before i purchased a new pair.

greg

 

[Pskhaat]

ARB roof rack for 80 series.

Looking for the good-ol 80 series roof rack.

 

[Ivan]

Looking for a set of Front Mud Flaps

the rear ones are bigger and say landcruiser.

i'll take all four if the price is right.

pm me a price.