Wanted FJ60 Manual (28 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
ttt
could you elaborate on this statement
"Drill and install a threaded plug in the area of the dreaded cylinder head plug."
"Drill and install a threaded plug in the area of the dreaded cylinder head plug."
You have a PM.
orangefj45
Supporting Vendor
where are you?
I need the big valve just to the right and up of # 7 that looks like a tophat.
mike
82bj42 1st project
I'm in Toronto, Canada. Thx
no one out there with a used bellhousing?
locking hubs
I need to get the passenger side locking hub for a 1985 mini truck. I don't think I need anything other than the gasket and the piece that actually locks the hub with the nuts/screws included but I could be wrong. I bought my fj a couple of weeks ago and it did not come with the part of the hub that you use to lock it into 4 wheel drive. If someone does not want to sell it by itself, then I will buy the driver and passenger side if needed. I don't know what a good price for these are and I don't know if it is all that I need yet. If someone could help me out, I would appreciate it. Thanks, RG
I need to get the passenger side locking hub for a 1985 mini truck. I don't think I need anything other than the gasket and the piece that actually locks the hub with the nuts/screws included but I could be wrong. I bought my fj a couple of weeks ago and it did not come with the part of the hub that you use to lock it into 4 wheel drive. If someone does not want to sell it by itself, then I will buy the driver and passenger side if needed. I don't know what a good price for these are and I don't know if it is all that I need yet. If someone could help me out, I would appreciate it. Thanks, RG
I've got a nice set of a 77 FJ40, still with original paint, and no damage whatsoever. $100 for the set + shipping from 75057 zip.
Parts for '77 FJ40
I recently bought a '77 FJ40. The PO chromed misc. parts all over, and I think finding replacements is easier than un-chroming them! List includes a couple other items needed. If you can help, please give me a shout. I'm in Costa Mesa, California (92627).
Ashtray
Bumperettes
Front Bumper
Inside Door Panels
Wiper Motor Box
Windshield Hinges
Gas Filler Door
Front Seat Belts (fabric)
Transfer case shifter knob
Cigarette lighter
I recently bought a '77 FJ40. The PO chromed misc. parts all over, and I think finding replacements is easier than un-chroming them! List includes a couple other items needed. If you can help, please give me a shout. I'm in Costa Mesa, California (92627).
Ashtray
Bumperettes
Front Bumper
Inside Door Panels
Wiper Motor Box
Windshield Hinges
Gas Filler Door
Front Seat Belts (fabric)
Transfer case shifter knob
Cigarette lighter
i've got one for 150 but the shipping from nc would probably kill the deal
but email me if you realy want it ryansblueblazer@yahoo.com
but email me if you realy want it ryansblueblazer@yahoo.com
cruiserbrett
GOLD Star
davisdrafting said:
there is a peened aluminum plug in an oil passage that can, and has worked loose on 2F and 3FE heads. When the head is off, either new or used, have the machine shop doing the work install a threaded plug to prevent it from popping out and quickly draining the engine of oil.
Any other help would be appreciated! 
I just did a motor swap. 78 2f, new fuel & water pump almost new starter (paid over 100$) compression is very good. reason for swap was my friends have big motors and talked me into a 350. this motor does need head work, it smokes
I have extra part for it carb,oil filters, wires, plugs etc also have motor out of 73 cruiser make offer. i need grage space.
steve @
landcruncher@msn.com
I have extra part for it carb,oil filters, wires, plugs etc also have motor out of 73 cruiser make offer. i need grage space.
steve @
landcruncher@msn.com
Sorry for the hijack, but do they do good work?
