Wanted FJ60 Manual

[WALoeIII]

WTB - FJ60 Dash Trim/Stereo Mount

I'm looking for the plastic piece that the dash switches and cig lighter mount in. Mine was broken when it was taken out to mount the stereo. Also if anyone has the mount for the stereo? Mine is kinda just hanging out in the slot - not really sure how it was mounted in the first place though.

 

[DIESEL40]

I have it in good shape!
PM me.
Thanks,
Mark

 

[ats72fj]

WTB 33" Mud Terrains

Want to buy set of 33" mud terrain tires in good condition. Someone needs to upgrade and sell your 33's. For 15" wheels.

 

[Cruiserdrew]

80 series drag link end

I've got a spare drag link and tie rod thanks to sliver cruiser, and spare tre's thanks to dclee. I am missing the wheel drag link end that attaches to the passenger side steering arm. It doesn't have to be perfect-these will be for spares to keep in the 80.

 

[hpatino]

Con - Ferr Shackles

I am looking for a pair of Con-Ferr shackles for my '70 FJ40, 1.5" lift. Con-Ferr part number is T-1078...Let me know....Thanks!

 

[Jamison Workshop]

TTT, any word, anyone else. Hate to go to SOR for them.

 

[cosmo]

Still looking.

 

[clay]

stock rims for my bj

I would like to find some stock rims for my 82 bj 42 some hubcaps would be nice as well I bought this bj with 16" chevy rims on it and the turning radius is sad my old man 60 turns circle around me and I had to adjust my bumpstops way out to keep the tires off the tie rod ends

 

[Merc]

hmmm.. ok

i like the idea of these extreme bends i got a motor some guy drove up here and said that he had one and gave it to me. I bored it out cleaned it up and it runs like new. I put a super charger on it only because my brother told me that he wanted one. IT is painted 309 freeborn red and black rhinolined on the interior. I put 4 inches of lift and bendable shackles on it. It also got 2 brando new unimog portal axles and a ox cable locker for the front and a spool for the rear. I put on a curry air compressor and made the front and rear bumpers into air tanks as well as put air bags into the rear to make the ride a little better. just havn't got that tranny in yet.

Is that gear for mating an sm420 onto the stock 3 speed transfer case. All it has is high and low and it was mated to that stock 3 on the tree they all seem to come with. Last question is that your website says 225 cdn. does that mean that the amount is in canadian dollars or what. If so can you give me a conversion ratio or something to figure out how much it would be in american. That would be most helpfull. Thanks for your time and help.
I will pay full shipping and even include an extra bit of cash for immidiate delivery if you can. I really want to get this project done and over with as soon as possible to get my brother off my back for not meeting my deadline. Thanks in advance.

Merc

 

[72cruiser]

good lord man....can your parents adopt me so i can be your brother too??

ha ha, good luck with the deadline bud, hope you make it


malphrus

 

[72cruiser]

early tub....

sup fellas,

i figured i just go ahead and post this up here, might be worth a shot...

i'm lookin for any year early tub (barn doors/tailgate, not ambi's) from the cowl back....

i have a lot of rust in mine, along with a huge dent/crumple zone in the floor/rear sill/quarter panels....


i'm not goin for a resto here or anything, just something relatively straight that i can put back on my frame, so it doesn't have to be beautiful...i don't mind cut fenderwells either.

i know that canoechris or chriscanoe has one over in the for sale section, and i'm in line, but really doubt that i'll end up with it, ha ha.

i'm in south carolina, will drive just abt anywhere, and money is an issue, ha ha, so whatever i can get....


malphrus

 

[robrachel_nola]

early tub

check ebay, there was any early ('68 I think) tub on there for about a thousand if I'm not mistaken. I'll try and paste a link in, but just go to ebay and type fj40 into the search bar and you should find it.

Good Luck.

 

[ibewebbman]

may have them...I'll check tonite

 

[robrachel_nola]

drop down tailgate

Anybody have a drop down tailgate they want to get rid of? I'd like to replace my swing out doors with a tailgate. I think the dimensions are the same from year to year. Mine is a '63. If I'm wrong let me know. Located in the south, let me know if you've got something.

Thanks

 

[ats72fj]

top

 

[Mud_Guppie]

the gear is for using the t-case from a four speed tranny
give me a call at 1-877-299-3540
everything is in stock

 

[fj40mayo]

sent you a pm.

 

[LT]

76 Aisin Carb Throttle Linkage

I need all of the factory linkage for the throttle cable for my aisin carb that is off of a 76. Thanks.

Travis

 

[Mace]

What supercharger did you put on a F motor???

 

[Polkabully]

Still looking.

Got it $25 + shipping

Kerry at 16ltoy@msn.com