Re: PTO Gearshift Flap
Sent you an email, Thanks!
Sent you an email, Thanks!
Wanted FJ60 Manual (39 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Re: Factory 40 series p/s wanted
A guy near hear (Long Island) Mark W. Had a complete bolt in Factory PS set up for sale His email addy is
FJ-60Mark@woytovich.com Give him a shout and see if he still has it. It was pretty expensive though...around 900.00 bucks he wanted for it.
If i maybe so bold as to ask are you just looking for a PS set up for PS or do you really want Factory PS? Reason i say this is you could easlily do a Toyota solid axle Mini trucks PS conversion which is essential the same thing except you have to buy or make a new mount for the PS box. you can buy the adpater plate from JToutfitters for like 100 and should be able to get a Solid axle PS set up for pretty cheap ~150.00 bucks. If you are interested in this i have a PS box out of and 81 toyota solid axle pickup i am looking to sell. email me or PM me if you are interested or want to talk more. If you alread knew all this stuff then you know what you want and you just waisted your time reading my BS. Good luck.
Stew
A guy near hear (Long Island) Mark W. Had a complete bolt in Factory PS set up for sale His email addy is
FJ-60Mark@woytovich.com Give him a shout and see if he still has it. It was pretty expensive though...around 900.00 bucks he wanted for it.
If i maybe so bold as to ask are you just looking for a PS set up for PS or do you really want Factory PS? Reason i say this is you could easlily do a Toyota solid axle Mini trucks PS conversion which is essential the same thing except you have to buy or make a new mount for the PS box. you can buy the adpater plate from JToutfitters for like 100 and should be able to get a Solid axle PS set up for pretty cheap ~150.00 bucks. If you are interested in this i have a PS box out of and 81 toyota solid axle pickup i am looking to sell. email me or PM me if you are interested or want to talk more. If you alread knew all this stuff then you know what you want and you just waisted your time reading my BS. Good luck.
Stew
Need FJ 60 springs
I need a full set of FJ 60 springs, let me know if anyone has some. I am in washington but would pay shipping. thanks joel
I need a full set of FJ 60 springs, let me know if anyone has some. I am in washington but would pay shipping. thanks joel
Cruiserdrew
On the way there
Re: Need FJ 60 springs
I have a set in Sacramento that came off my 60 on Jan 4. Since then they have been in the back yard and my wife wants me to throw them out. I havn't and they are too heavy for her so they will be there for some time. I'm not real anxious to ship and I'll bet it would be expensive but if you can't find some closer maybe we can work something out. These springs are original with the usual amount of sag. There is no significant rust.
I have a set in Sacramento that came off my 60 on Jan 4. Since then they have been in the back yard and my wife wants me to throw them out. I havn't and they are too heavy for her so they will be there for some time. I'm not real anxious to ship and I'll bet it would be expensive but if you can't find some closer maybe we can work something out. These springs are original with the usual amount of sag. There is no significant rust.
Re: doors hardtop for 80 bj40
I have one in Colorado.
I have one in Colorado.
Re: misc. needed
the rollbar, fenders, mirror, ww motors have been acquired. If anyone has a set of factory running boards, the long ones, (33.5") I need a set.
the rollbar, fenders, mirror, ww motors have been acquired. If anyone has a set of factory running boards, the long ones, (33.5") I need a set.
Re: Bikini Top
What is this extreme bikiini top and do they make it for the fj40's? It seems as if I must have missed part of htis thread.
What is this extreme bikiini top and do they make it for the fj40's? It seems as if I must have missed part of htis thread.
Re: Bikini Top
i never liked the looks of the extreme bikini or the fact that it was one unit, so i got a bikini from whitney's, then the rear curtain from tpi. that way, if i dont' want the rear curtain, i can remove it. i wish rock gear still made the tops for cruisers, too...they looked like they would've been a cool option.
i never liked the looks of the extreme bikini or the fact that it was one unit, so i got a bikini from whitney's, then the rear curtain from tpi. that way, if i dont' want the rear curtain, i can remove it. i wish rock gear still made the tops for cruisers, too...they looked like they would've been a cool option.
- Joined
- Apr 25, 2002
- Threads
- 23
- Messages
- 203
- Location
- Bella Vista, AR
- Website
- sf4wheel.alloffroad.com
Disk brake axle
I am looking for a complete front disk brake axle from a FJ40 for my Cruiser. I would also take a 1979-1985 Toyota mini axle complete. I just got my tax dollars back, so I have cash in hand. Hook me up if you can. Located in Arkansas. Thanks!
I am looking for a complete front disk brake axle from a FJ40 for my Cruiser. I would also take a 1979-1985 Toyota mini axle complete. I just got my tax dollars back, so I have cash in hand. Hook me up if you can. Located in Arkansas. Thanks!
WTB Rear Door Upper hatch for 72 FJ40
I need the whole kit and kaboodle:
Cross support
Door
Window and seals
Struts
Latches
I'm in Northern VA
Thanks
Todd
coachconverter@aol.com
I need the whole kit and kaboodle:
Cross support
Door
Window and seals
Struts
Latches
I'm in Northern VA
Thanks
Todd
coachconverter@aol.com
Re: Bikini Top
nuclearlemon, do you have a picture of this setup on your truck? I'd like to find something similar to the windjammer setup that bestop has for jeeps. It is similar to that extreme bikini except it completely covers the front cab, then where the extreme bikini ends, this top has a piece you can pull over the cargo bay to keep things dry. All of it folds up or rolls up out of the way. Maybe someone could make one custom.
nuclearlemon, do you have a picture of this setup on your truck? I'd like to find something similar to the windjammer setup that bestop has for jeeps. It is similar to that extreme bikini except it completely covers the front cab, then where the extreme bikini ends, this top has a piece you can pull over the cargo bay to keep things dry. All of it folds up or rolls up out of the way. Maybe someone could make one custom.
cruiserbrett
GOLD Star
FJ55 stuff wanted...
Anyone have an air conditioning setup for an FJ55-OEM Nippondenso either early or later style. I am interested in either parts or whole systems! Trying to get my truck setup with A/C...
rear cargo area rubber mat
PTO winch driveshaft for FJ55
thanks
Anyone have an air conditioning setup for an FJ55-OEM Nippondenso either early or later style. I am interested in either parts or whole systems! Trying to get my truck setup with A/C...
rear cargo area rubber mat
PTO winch driveshaft for FJ55
thanks
throttle cable,gas pedal
i need a cable and pedal for my 2f in the old 73 conversion,anybody have this?
shawn
i need a cable and pedal for my 2f in the old 73 conversion,anybody have this?
shawn
factory running boards
I need a set of factory running boards (later ones, 33.5" long) if anyone has any in decent shape, I'd appreciate it.
I need a set of factory running boards (later ones, 33.5" long) if anyone has any in decent shape, I'd appreciate it.
Re: PTO Gearshift Flap
I'll 3rd that i need one as well.....
I'll 3rd that i need one as well.....
G
Guest
Guest
Re: Factory 40 series p/s wanted
Thanks Stew! Yes I knew of Mark's setup, but avoided the price for a year. I will keep your mini box in mind, but I really want a factory 40 version if I can get one. I am doing a frame off and updating a lot of things with 70 series parts, etc, and prefer the "cleaner" approach of the factory setup.
Thanks!
Rick
Thanks Stew! Yes I knew of Mark's setup, but avoided the price for a year. I will keep your mini box in mind, but I really want a factory 40 version if I can get one. I am doing a frame off and updating a lot of things with 70 series parts, etc, and prefer the "cleaner" approach of the factory setup.
Thanks!
Rick
G
Guest
Guest
Re: 80 series 93-94 wheel wanted
Found. Thanks.
Rick
Found. Thanks.
Rick
