Wanted FJ60 Manual (44 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Re: three speed floor conversion

If you're really a K-State Cruiser you've got to be close to me, I'm in KC. &nbsp:Did you find a floorshift conversion? I've got a real clean one, with a brand new knob. It does not have the reverse switch. You can Email me offline if you are interested.
Ed Long

Aun2th@aol.com
 
Re: selectro locking hub cam plate needed

i've got two selectro hubs ( i believe they are complete). make me an offer and they're yours.
 
45 hardtop pieces and l apron

need a left apron without the marker light cutout and two of the 'j" hooks for the hardtop holddown email me at nuclearlemon@attbi.com if you can help. thanks
 
Re: steering arms needed

I am in the middle of an SOA. I aquired "bent" arms for the job. The old ones will be available. They are off of a 1966 FJ40 axle that will be boned out later. How soon do you need them?
I'm in Plymouth WI
 
Clutch/brake pedal set

I need a clutch and brake pedal set for my GPW project.

It is cool, I am naming it haggus ;)
 
Re: Front Bucket Seats Wanted

I took the set out of my 75 fj40 and put a set of leather buckets from a new saab sweeeeet but my old ones you can have they are wooped but free if you will come back to PA
 
Re: steering arms needed

I've got a couple arms from my '70. They came off of the drum knuckles... So I don't know if they would work for you. They're in Lincoln, CA
Zipp
 
WTB HARDTOP AND DOORS FOR 69 FJ40

DECENT SHAPE IN OR NEAR TO ARIZONA. POST HERE OR SEND A PM. I DON'T CHECK MY EMAIL AS OFTEN AS I DO THE BOARDS.

THANKS
BRANDEN
 
Re: steering arms needed

i need a junk passenger side arm if anybodys got one.....and im in WI
 
Re: misc. needed

I've got some rear jump seats. They are the short one.
 
Re: misc. needed

what do you want for the jumpseats? what kind of shape? where are you located, we are in eastern montana.
 

Users who are viewing this thread

Back
Top Bottom