Wanted FJ60 Manual (2 Viewers)
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Feb 26, 2002
- Threads
- 0
- Messages
- 5
Wanted: AISIN hubs!!
I am in need of a pair of AISIN hubs in excellent condition. I will also consider just the aluminum hub body, studs and cone washers.
I am also interested in a pair of 60 series rear axle shafts, must be in excellent condition and *reasonable* price.
If you're parting out a 1985-1987 FJ60, I need the A/C amplifier and Idle-Up solenoid, I can describe exact locations.
If it's an FJ62 that you're parting out, I need a driver's side door in excellent-to-mint condition and *reasonable* price, doesn't have to have mirror or internal panel, but must be absolutely rust free.
Email me at <cubillan@earthlink.net>, I don't check this forum every day.
Cheers!
I am in need of a pair of AISIN hubs in excellent condition. I will also consider just the aluminum hub body, studs and cone washers.
I am also interested in a pair of 60 series rear axle shafts, must be in excellent condition and *reasonable* price.
If you're parting out a 1985-1987 FJ60, I need the A/C amplifier and Idle-Up solenoid, I can describe exact locations.
If it's an FJ62 that you're parting out, I need a driver's side door in excellent-to-mint condition and *reasonable* price, doesn't have to have mirror or internal panel, but must be absolutely rust free.
Email me at <cubillan@earthlink.net>, I don't check this forum every day.
Cheers!
SpaceGhost
GOLD Star
Re: Wanted: AISIN hubs!!
Hey Henry, the body isn't aluminum at least on any I have seen. It's plated steel. I'll keep my eyes open for ya.
Hey Henry, the body isn't aluminum at least on any I have seen. It's plated steel. I'll keep my eyes open for ya.
SpaceGhost
GOLD Star
Re: Cap for master cyl and clutch cyl
I have a new in the box clutch master cylinder. Just got from SOR with their slave and line kit. Only used the slave so the master is for sale. $35 and I'll cover shipping. msmythe@iei.net
I have a new in the box clutch master cylinder. Just got from SOR with their slave and line kit. Only used the slave so the master is for sale. $35 and I'll cover shipping. msmythe@iei.net
Wanted: Disk Brake Front for 75 FJ40
Looking for a Disk Brake setup that will work with my 75 FJ40. Located in Texas.
fj40@ithelptoday.com
Looking for a Disk Brake setup that will work with my 75 FJ40. Located in Texas.
fj40@ithelptoday.com
Re: Need a spring over kit for a 1972 fj55
Looking to spring over your pig? Sweet! How are your fabrication skills? I don't think that anyone really makes a kit for it, but you can very easily piece together the parts necessary. If your other post was correct, and you are in chico- I could possibly help you with it. Springing over my pig took me many weekends of driving back home to work on it- but after completing it, I see no reason why it shouldn't take more than a weekend (if you have all of the parts and equipment ready...)
Shoot me an email at bjzipp@ucdavis.edu
Later- Brandon.
Looking to spring over your pig? Sweet! How are your fabrication skills? I don't think that anyone really makes a kit for it, but you can very easily piece together the parts necessary. If your other post was correct, and you are in chico- I could possibly help you with it. Springing over my pig took me many weekends of driving back home to work on it- but after completing it, I see no reason why it shouldn't take more than a weekend (if you have all of the parts and equipment ready...)
Shoot me an email at bjzipp@ucdavis.edu
Later- Brandon.
Re: NEW & USED PARTS
heart of texas offroad has the handles for $37. I used some stuff like this
http://durafix.com/?go2
that I got a few years back to fix my busted handle....so far so good its still holding together.
heart of texas offroad has the handles for $37. I used some stuff like this
http://durafix.com/?go2
that I got a few years back to fix my busted handle....so far so good its still holding together.
FJ40 NEW driver's door vent window rubber seal
To fit '70 FJ40 driver's door wing window,... the one piece rubber seal that envelopes the glass & frame. I found the passenger's side thru my local Toyota dealership,... driver's side is discontinued.
Anyone have a resource?
Many thanks, Maintz
To fit '70 FJ40 driver's door wing window,... the one piece rubber seal that envelopes the glass & frame. I found the passenger's side thru my local Toyota dealership,... driver's side is discontinued.
Anyone have a resource?
Many thanks, Maintz
Re: Need a 72ish Rear Tire Carrier
If you still have it, ill take it! Is it badly rusted? How are the hinges? Ill try to get a hold of you this weekend.. Thanks
If you still have it, ill take it! Is it badly rusted? How are the hinges? Ill try to get a hold of you this weekend.. Thanks
Re: FJ40 NEW driver's door vent window rubber seal
check out the classifieds page in the latest tt. tlc 4x4 has sets advertised.
check out the classifieds page in the latest tt. tlc 4x4 has sets advertised.
Re: FJ40 NEW driver's door vent window rubber seal
And I had just read my TT last night,... must have noted every article and ad, except for the one I needed! Thanks for the help!
Maintz
TLCA 13045
And I had just read my TT last night,... must have noted every article and ad, except for the one I needed! Thanks for the help!
Maintz
TLCA 13045
Re: Wanted: Disk Brake Front for 75 FJ40
Don't know what shipping for the axle would be but I've got a 79 truck i'm parting out. In Cape girardeau, MO. just letting you know incase you can't find one closer. If you're interested make me an offer. I also have the master and booster if those are necessary for the conversion.
Don't know what shipping for the axle would be but I've got a 79 truck i'm parting out. In Cape girardeau, MO. just letting you know incase you can't find one closer. If you're interested make me an offer. I also have the master and booster if those are necessary for the conversion.
Looking for FZJ80 Snorkel
If you have a snorkel for a fzj80 that you would like to get rid of, email me at:
Bryank321@hotmail.com
Thanks,
Bryan
If you have a snorkel for a fzj80 that you would like to get rid of, email me at:
Bryank321@hotmail.com
Thanks,
Bryan
Late model hard doors for '78 FJ40
Looking for a very clean set of hard doors without rust or repair needed in or near Dallas/Ft. Worth, Austin, San Antonio, or Houston, TX.
Looking for a very clean set of hard doors without rust or repair needed in or near Dallas/Ft. Worth, Austin, San Antonio, or Houston, TX.
Re: Exhaust Manifold
I have a '71 and was thinking off getting headers. So if you want mine.....
I'm pretty sure there is nothing wrong with it, I'll double check it if you know what I should look for.
I have a '71 and was thinking off getting headers. So if you want mine.....
I'm pretty sure there is nothing wrong with it, I'll double check it if you know what I should look for.
