Wanted FJ60 Manual (4 Viewers)

[Outback]

WTB: '79-'84 Minitruck Aisin locking hubs

Nevermind... Got some from Marlin Crawler, fully reconditioned and painted up new for $75/pr.

Thanx folks...

 

[Travis_Kinney]

old style front 1/3 2/3 bench seat covers

Wandering if anyone out there might have replaced there seats and have in good condition, covers for the old style front bench?

 

[slambson]

91-97 FJ 80 coils

Sorry to Shanghi this thread but I would also be interested in some low mileage springs for my aging 92 LC. Anyone know if the spring rate is any higher on the later models? Anyone interested in selling e-mail slambson@ida.net. Shipping would be to 83204.

 

[BigRed87]

fj60/62 Stock Leaf Springs

I have a complete set, none are broken, located in west TX, rears were saggin a bit when removed.

 

[nuclearlemon]

fj60/62 Stock Leaf Springs

where are you located? i have a set in denver...along with a bunch of 40 springs, one set of 60 alcans (backs beyond flat, fronts...damaged), and one front pinnacle for a 60.

 

[cruiser_guy]

FJ55 blower resistor

I'm looking for a good UNBROKEN FJ55 heater blower resistor for the above year span. Anyone have one that they can package up REAL CAREFUL like and send out?

 

[Eternal]

old style front 1/3 2/3 bench seat covers

No covers but I have a bench in good condition.PM me if you are interested, Kelowna BC Canada

 

[gater75]

turn signal wanted

I am looking for a turn signal for a 70 fj40, I would rather it be in good condition, but anything would be better than the wires sticking out of the fender
Rod

 

[78 One owner]

FJ40 lift - You got sumthin'?

I will be going SOA sometime soon but I need to round op some components first. You in a hurry?
I have an LCAH SR kit with 2.5" lift Ranchos on the front. And, 4" Skyjacker Softride springs on back. I love 'em but, I need more ground clearance for the boulders in the canyons I've been playing in. Send me a PM and I'll save it so I can get back to you.
I'm looking for FJ55 springs. Any body got a line on some, then I could helpout brandxmgmt

 

[notagp_afj55]

turn signal wanted

Check liquidoffroad.com they should have what you need
and at a resonable price....

 

[notagp_afj55]

Lift for a FJ-55

Anyone out there in pig land have anything?
JimK

 

[notagp_afj55]

chev 350 to landcruiser 4 sp tranny adapter

Looking for either the bellhousing or plate to adapt
above description...thanks
JimK

 

[HI^C]

chev 350 to landcruiser 4 sp tranny adapter

Have complete motor mounts w frame mounts, plate and bell, tranfer case mount w frame mounts, available as a package prefered.

I also have flywheel, clutch pressureplate, trans available out of the same, all came out of a 79 fj40.

dont really need it anymore.

send me a email or pm, dont check the wanted to often.

 

[BigSur]

fj60/62 Stock Leaf Springs

I have a stocked set...both the front and rear have been re-arched and the rear has an add-a-leaf for better rear loads. All i great shape.

PM if interested. BTW...these are located in Dallas.

 

[TJDIV]

Painless Wiring Harness

I'm going to be replacing the wiring in the 45; figured I might as well do it now while it's down for paint.

Anybody got one, or am I going to have to order it?

FJ45LV@cox.net

 

[amandap]

need ebrake cable from fj40 4 spd

Swapped a four spd into my 66 FJ40 and need a longer e-brake cable in decent shape. thx

 

[nspctr1]

Re:need ebrake cable from fj40 4 spd

I may have one, do you have a pic of the one you need? the ends are different. I found out because I need one for my 71 and picked up a cable from a 76 and it didn't work because==== the ends were different. Anyway, If you have a pic or a good description of the one you need, email me and I'll dig it out of the box of stuff I have.

 

[burger]

Spring loaded seat brackets.

Does anyone know where I can get some brakets that you mount your seat to that are the spring loaded(almost like air ride)type. I think they were stock on some 70 series and some import 60 series. I am looking for a set for my hj61.

 

[cali-cruiser]

35+ tires on 15rims

I need between 35 and 37s that are road worthy and I have a 2f to trade or other random parts

 

[Dave]

Spring loaded seat brackets.

[quote author=burger link=board=21;threadid=16530;start=msg158877#msg158877 date=1084845356]
Does anyone know where I can get some brakets that you mount your seat to that are the spring loaded(almost like air ride)type. I think they were stock on some 70 series and some import 60 series. I am looking for a set for my hj61.
[/quote]

Ebay??

http://cgi.ebay.com/ebaymotors/ws/e...tem=2479057923&category=33701&sspagename=WDVW