Engine cover

[Shabzy35]

Hi All,

I just bought a 100 Series with 215k Miles. I just noticed something is missing on both sides. Can you please take a look at the pictures and advise what can be done. Is there a part number or some solution? There is rust on many nuts and bolts in the engine bay and i suspect this could be the reason. Kindly let me know. Thanks!

 

[saucebox]

Search on "skirts" here in this forum. For whatever reason, that's what Toyota calls them

 

[gregnash]

Yup... they can also be called "aprons" as well... Fender Skirts/Aprons
I know that @TRAIL TAILOR makes them for the 60 series Land Cruisers, not sure if he does for the 100s.

 

[saucebox]

Yup... they can also be called "aprons" as well... Fender Skirts/Aprons
I know that @TRAIL TAILOR makes them for the 60 series Land Cruisers, not sure if he does for the 100s.

Rad Rubber Designs make a set for the 100 series. They're good.

Rad Rubber Design – FJ Fender Flaps, Toyota Engine Splash Guards – Rad Rubber Design – FJ Fender Flaps, Toyota Engine Splash Guards

 

[hoser]

Alignment shops take them off and sometimes don't put them back on.

 

[Shabzy35]

Alignment shops take them off and sometimes don't put them back on.

I agree.. also the cover below the transmission pan is missing...

Rad Rubber Designs make a set for the 100 series. They're good.

Rad Rubber Design – FJ Fender Flaps, Toyota Engine Splash Guards – Rad Rubber Design – FJ Fender Flaps, Toyota Engine Splash Guards

Thank you, i appreciate it!

Can someone share a picture.. how they should look. Thank you

 

[jerryb]

that pic isn't the one you need. but the look like that,,, loosely

FRONT FENDER APRON & DASH PANEL | Toyota LAND CRUISER 100 UZJ100L-GNAEKA UZJ100 | Parts Catalogs | PartSouq

If you are looking for FRONT FENDER APRON & DASH PANEL Parts for Toyota LAND CRUISER 100 UZJ100L-GNAEKA UZJ100 then we advise you to pay attention to the range of our spare parts catalog for Toyota!

partsouq.com

 

[geanes]

I agree.. also the cover below the transmission pan is missing...

Pretty sure most people are missing that one. Inevitably one of the "ears" breaks off and they then rattle like crazy. Removed mine after a week.

 

[Shabzy35]

that pic isn't the one you need. but the look like that,,, loosely

FRONT FENDER APRON & DASH PANEL | Toyota LAND CRUISER 100 UZJ100L-GNAEKA UZJ100 | Parts Catalogs | PartSouq

If you are looking for FRONT FENDER APRON & DASH PANEL Parts for Toyota LAND CRUISER 100 UZJ100L-GNAEKA UZJ100 then we advise you to pay attention to the range of our spare parts catalog for Toyota!

partsouq.com

View attachment 2306336

Wish i can get a part # for LC100

 

[gregnash]

Wish i can get a part # for LC100

Go to that site.. partsouq.com and type in your VIN. You will have to do some hunting through the different schematic categories but you will find the one specific to your model.

 

[SlowBuild]

Can someone share a picture.. how they should look. Thank you

I bought these and they’re in my garage for two weeks now, maybe I’ll throw them on tonight, should be a quick install.
@NHouston recently installed a set:

Installed my new Rad Rubber Engine Splash Guards. Great upgrade considering my original guards didn’t fit quite right after my body lift. Rad Rubber can make these splash guards for those of us that have a body lift.

View attachment 2301827

View attachment 2301828

View attachment 2301829

 

[Shabzy35]

I bought these and they’re in my garage for two weeks now, maybe I’ll throw them on tonight, should be a quick install.
@NHouston recently installed a set:

This is great.. Did you install on the rear too? Thanks for sharing.

 

[saucebox]

I bought these and they’re in my garage for two weeks now, maybe I’ll throw them on tonight, should be a quick install.
@NHouston recently installed a set:

Like 10 minutes, tops.

 

[AlpineAccess]

For what it's worth, I remove these with my fender clip puller tool before getting an alignment. The guys at the alignment shops often snap these clips and don't replace them. Eventually you're down to one or two clips holding on and they fall off or get removed because of noise as mentioned by others.

You can buy an entire assortment box of miscellaneous clips on Amazon or other auto supply stores for under $10. They work just fine.

 

[Shabzy35]

For what it's worth, I remove these with my fender clip puller tool before getting an alignment. The guys at the alignment shops often snap these clips and don't replace them. Eventually you're down to one or two clips holding on and they fall off or get removed because of noise as mentioned by others.

You can buy an entire assortment box of miscellaneous clips on Amazon or other auto supply stores for under $10. They work just fine.

Do you have a picture or a link to share? I'd appreciate that.. Thanks!

 

[AlpineAccess]

Do you have a picture or a link to share? I'd appreciate that.. Thanks!

A picture of the fender clip assortment?