Early Collision Warning Error Message

[Roy Park]

Hey guys,

I took my truck in for an alignment and I think the shop may have unplugged a wire or something. I am getting an error message for the collision warning system. I've looked under the truck and don't see anything loose. Anyone have an idea of where I should be looking? Any help would be much appreciated.

 

[GordJ]

When I got the warning it was snow on the front radar unit. The big L was covered in slush, cleaned it off and good to go.

 

[Roy Park]

When I got the warning it was snow on the front radar unit. The big L was covered in slush, cleaned it off and good to go.

My truck has definitely been dirtier than it is now without issue. I'll try cleaning off the logo. Thanks.

 

[gaijin]

Hey guys,

I took my truck in for an alignment and I think the shop may have unplugged a wire or something. I am getting an error message for the collision warning system. I've looked under the truck and don't see anything loose. Anyone have an idea of where I should be looking? Any help would be much appreciated.

Do you have any aftermarket goodies mounted to the front of your truck within the detection field of the radar antenna?

HTH

 

[Roy Park]

Do you have any aftermarket goodies mounted to the front of your truck within the detection field of the radar antenna?

HTH

I have these guys . . .

But they didn't cause any issues before. I'm wondering if @reevesci Actually unplugged something and these guys plugged it back in.

 

[TRAIL TAILOR]

Only two plugs I mess with. One for the camera and one for the sonar/fog lights.

Both were plugged back in.

J

 

[Roy Park]

Only two plugs I mess with. One for the camera and one for the sonar/fog lights.

Both were plugged back in.

J

Yeah. It was working fine before the alignment. I'm not sure what happened but I may have to take it to a speakership.

 

[lex97h]

It happened to a friend of mine that had the LX570 and he had his camera unplugged. He ended up taking it to the Lexus dealership to have the camera reset.