custom build rear bumpers?
- Thread starter PolishX
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
search! a few weeks ago there was a thread of a sweet rear bumper taht lowtideride did. let me see if a can find it.
AKCRUZR may have some pictures of his. Todd K may have some of his (or whoever bought it next may have some?). Like I mentioned in reference to the tire carrier itself, look at Tim's too. These are all basically the same bumper setup. There's another running around locally in addition to Tim's but it's seldom on the road. 
Bobbed quarter panels, wrap around bumper reaching to the wheel wells, 3x4x3/16, mounted to the rear of the frame and with struts mounting the front extensions to the frame rails too.
Tire carrier and gas can carriers pivoting on each side w/latches in the middle.
These will take the abuse. I've seen a couple show daylight under the rear tires as they leave a ledge. Bumper takes a whack with nothing worse than scratched paint on the bottom of the bumper. The carriers will take the weight too. Long term usage with 200+ pounds and no complaints. None that I've been told of anyway.
But no plans.All in my head.
Mark...
Bobbed quarter panels, wrap around bumper reaching to the wheel wells, 3x4x3/16, mounted to the rear of the frame and with struts mounting the front extensions to the frame rails too.
Tire carrier and gas can carriers pivoting on each side w/latches in the middle.
These will take the abuse. I've seen a couple show daylight under the rear tires as they leave a ledge. Bumper takes a whack with nothing worse than scratched paint on the bottom of the bumper. The carriers will take the weight too. Long term usage with 200+ pounds and no complaints. None that I've been told of anyway.
But no plans.All in my head.
Mark...