Clutch Master Cylinder Help (1 Viewer)

[mhall10407]

Well it looks like the clutch master cylinder on the 40 is almost dead. I think it may still have the original in there. Anyways to my question. Has anybody changed theirs and have some pointers on what to do or not to do. I assume just swap it out and bleed the lines and should be good to go.

Thanks,
Mike

 

[Toycrusier1]

That should do it. Just bleed it like you would the brakes. Also might want to check the adjustment afterward.

 

[Capt. Jim]

Mike,

Be sure to use a line wrench on it. If it is the original master, it may be difficult to break free and you will round-off the line nut.