- Location
- United States
Have a bunch of stuff for which I'd like to find new owners. I don't want to ship the big stuff- I have been bogged down and unhappy recently with shipping big stuff. It can be a hassle. In any event here's a list of some of the stuff- everything located here in northeast PA. will ship smaller items but not big items!. Here's a list:
Custom made bucket seat framework, is a bolt in for a 55 and is set up for 4Runner/Toy truck seats. I ran this in my orange and white pig for years. Allows for lots of underseat storage and again is a BOLT IN frame. Price $45, I have two nice tan SR5 seats from an 85 4Runner that I can include for an additional $55 make it an even $100 for the frame and seats. I loved these in my 55- they looked good and were very comfortable. lotsa guys had seat time in my 55 either behind the wheel or as a passenger and all liked the seats. The seats aren't perfect but they are pretty darn good and have the SR5 printed upholstery. Pickup only for these.
Crossmember- - with skid plate. I ran this crossmember under the transfer case when i installed a doubler behind my 2F engine. includes a nice heavy skid plate that attaches with screws to the crossmember. well buuilt and good looking. I don't remember how the crossmember attached to the frame but I think it attached with screws to the frame rails. $50 for both pieces pickup only.
Very nice rust free driver side fender (both pieces upper and lower) with turn signal and silver grille. May have been slightly trimmed at the very bottom of the fender i don't remember. Got this unit from Tom Humphries to replace the fender damaged when we flopped the old girl onto its side. This is well worth $100 will not ship pickup only. If your pig is white and orange the colors will match, too.
A decent passenger fender complete with turn signal and grille I am sure this has been slightly trimmed on the bootm this is a top/bottom fender assembly $40 pickup only.
I also have some front fender repair pieces- rust free believe it or not. Got these in a deal yeasr ago and never used them. I can ship these if needed but they are somewhat bulky, no make that odd shaped. If anyone needs anything specifically let me know I can get some detail photos. Frankly I'd like to sell these puieces without any further investment of time on my end so if someone weants them all sight unseen lets say $50 I'll give all the sheet metal repair parts I have. Guaranteed well worth the price and at that price I will say pickup only for the lot.
Complete rear window wiring harness from the joint at the driver door sill back to the regulator $20 will ship.
Hood- have a late model hood not perfect but not bad white in color $45 pickup only.
Tailgate- have a rust free tailgate sheel from a 69 FJ55 $65 pickup only color is maroon and white this one came from western Colorado.
Tailgate from a 76 (I think) piggy looks good price $35 pickup only.
Radiator- a genuine Toy rad rebuilt with heavy core I ran this in my 78 pig for years with no overheating ever. The 55 could sit and idle for an hour in 100 degrees and never have the needle go up. I paid $425 for the recore job $125 for this rad pickup only
Radiator from a 79 piggy it came from a running truck (remember the yellow and black topless 55 from VA on sale here years ago) so I figure it's still good. $50 will not ship
Gas tank from my 78 piggy never any fumes or leks $20 pickup only
Glove box door very nice pad is good $20 plus shipping.
Instrument cluster have several $25 each all have good vinyl padding.Will ship
Heater control units complete with all cables some still have the electrical switces have several $15 each will ship
Tailgate window motor and linkage assembly complete with motor and good wiring $50 will ship
Transmission/transfer case cover $20 will ship
Grilles- have several all are pretty good $15 each will ship
Headlight trim pieces $15 per pair will ship
Additionally I will be listed separately a lot of weatherstripping parts- some OEM Toy some rare spares from Australia. No rear window seals, don't ask. Will be listing these as a lot so keep tuned. Best to email at home shmukter@pa.metrocast.net or at work GSCHMAUCH@cartech.com. Thanks, Gary S
Custom made bucket seat framework, is a bolt in for a 55 and is set up for 4Runner/Toy truck seats. I ran this in my orange and white pig for years. Allows for lots of underseat storage and again is a BOLT IN frame. Price $45, I have two nice tan SR5 seats from an 85 4Runner that I can include for an additional $55 make it an even $100 for the frame and seats. I loved these in my 55- they looked good and were very comfortable. lotsa guys had seat time in my 55 either behind the wheel or as a passenger and all liked the seats. The seats aren't perfect but they are pretty darn good and have the SR5 printed upholstery. Pickup only for these.
Crossmember- - with skid plate. I ran this crossmember under the transfer case when i installed a doubler behind my 2F engine. includes a nice heavy skid plate that attaches with screws to the crossmember. well buuilt and good looking. I don't remember how the crossmember attached to the frame but I think it attached with screws to the frame rails. $50 for both pieces pickup only.
Very nice rust free driver side fender (both pieces upper and lower) with turn signal and silver grille. May have been slightly trimmed at the very bottom of the fender i don't remember. Got this unit from Tom Humphries to replace the fender damaged when we flopped the old girl onto its side. This is well worth $100 will not ship pickup only. If your pig is white and orange the colors will match, too.
A decent passenger fender complete with turn signal and grille I am sure this has been slightly trimmed on the bootm this is a top/bottom fender assembly $40 pickup only.
I also have some front fender repair pieces- rust free believe it or not. Got these in a deal yeasr ago and never used them. I can ship these if needed but they are somewhat bulky, no make that odd shaped. If anyone needs anything specifically let me know I can get some detail photos. Frankly I'd like to sell these puieces without any further investment of time on my end so if someone weants them all sight unseen lets say $50 I'll give all the sheet metal repair parts I have. Guaranteed well worth the price and at that price I will say pickup only for the lot.
Complete rear window wiring harness from the joint at the driver door sill back to the regulator $20 will ship.
Hood- have a late model hood not perfect but not bad white in color $45 pickup only.
Tailgate- have a rust free tailgate sheel from a 69 FJ55 $65 pickup only color is maroon and white this one came from western Colorado.
Tailgate from a 76 (I think) piggy looks good price $35 pickup only.
Radiator- a genuine Toy rad rebuilt with heavy core I ran this in my 78 pig for years with no overheating ever. The 55 could sit and idle for an hour in 100 degrees and never have the needle go up. I paid $425 for the recore job $125 for this rad pickup only
Radiator from a 79 piggy it came from a running truck (remember the yellow and black topless 55 from VA on sale here years ago) so I figure it's still good. $50 will not ship
Gas tank from my 78 piggy never any fumes or leks $20 pickup only
Glove box door very nice pad is good $20 plus shipping.
Instrument cluster have several $25 each all have good vinyl padding.Will ship
Heater control units complete with all cables some still have the electrical switces have several $15 each will ship
Tailgate window motor and linkage assembly complete with motor and good wiring $50 will ship
Transmission/transfer case cover $20 will ship
Grilles- have several all are pretty good $15 each will ship
Headlight trim pieces $15 per pair will ship
Additionally I will be listed separately a lot of weatherstripping parts- some OEM Toy some rare spares from Australia. No rear window seals, don't ask. Will be listing these as a lot so keep tuned. Best to email at home shmukter@pa.metrocast.net or at work GSCHMAUCH@cartech.com. Thanks, Gary S
