ARCHIVE Center Console Liners for 60, 80, 100 and LX.

[NLXTACY]

When you look in the center console of your Cruiser, do you ever feel as though there should be some kind of mat to prevent all of your crap from sliding around and making noise and scratching up the plastic? Well your truck new probably came with either a brown or a gray mat. The ones found in the 80 Series in particular wasn’t the best material and it just didn’t seem to last very long before it was time to toss it out. Wits' End finally found the perfect material to custom cut to exactly fit your Land Cruiser.

These liners are are die cut to fit the bottom compartment area of your console. Each is cut from stiffened felt to give the best wear life possible while keeping things from sliding around too much.

One side is silk-screened with our Wits’ End logo so you can proudly show off to your friends. You were at your wits’ end and you wanted a solution. Don’t want to stare at the logo? Turn it around, and hide that ugly ass logo

60 Series Liner: http://absolute-wits-end.com/60-series-land-cruiser-center-console-liner/
60 Series Pocket coming soon
80 Series Lower: http://absolute-wits-end.com/80-series-land-cruiser-center-console-liner-lower/
LX450 Lower: http://absolute-wits-end.com/lexus-lx-450-center-console-liner-lower/
80 Series/LX Upper: http://absolute-wits-end.com/80-series-or-lx-450-center-console-liner-upper/
80 Series Pocket: http://absolute-wits-end.com/80-series-land-cruiser-center-console-liner-pocket/
100 Series Upper: http://absolute-wits-end.com/100-series-land-cruiser-center-console-liner-upper-2003-2007/

 

[MANUCHAO]

any word on the tuffy center console thingy...
WTF dude

What bout the fire extinguisher mount for the 60'$ $eries...?

 

[NLXTACY]

any word on the tuffy center console thingy...
WTF dude

There are a couple of options on the TUFFY. I really need to get in front of one to verify a few things. I'm trying to get to 4Wheel Parts but been slammed on the R&D side for other products.

What bout the fire extinguisher mount for the 60'$ $eries...?

I had a 6/85 FJ60 here at my house this morning where I took a bunch of measurements and made up a prototype of one side. I need to finish the other side and then build a proto. There are a few ways to go with this but I am leaning towards ALSO adding in a locking lid option.

 

[NLXTACY]

Can add the 60 Series front pocket to the list
Working it up now to add to the site.

Special thanks to @nfranco

 

[NLXTACY]

Just got in the 62 series console. The pocket is the same as the 80 Series Pocket. The console is of course different so I'll be making a new one.

 

[Lonewolf5]

When you look in the center console of your Cruiser, do you ever feel as though there should be some kind of mat to prevent all of your crap from sliding around and making noise and scratching up the plastic? Well your truck new probably came with either a brown or a gray mat. The ones found in the 80 Series in particular wasn’t the best material and it just didn’t seem to last very long before it was time to toss it out. Wits' End finally found the perfect material to custom cut to exactly fit your Land Cruiser.

These liners are are die cut to fit the bottom compartment area of your console. Each is cut from stiffened felt to give the best wear life possible while keeping things from sliding around too much.

One side is silk-screened with our Wits’ End logo so you can proudly show off to your friends. You were at your wits’ end and you wanted a solution. Don’t want to stare at the logo? Turn it around, and hide that ugly ass logo

60 Series Liner: 60 Series Land Cruiser Center Console Liner
60 Series Pocket coming soon
80 Series Lower: 80 Series Land Cruiser Center Console Liner- Lower
LX450 Lower: Lexus LX 450 Center Console Liner- Lower
80 Series/LX Upper: 80 Series or LX 450 Center Console Liner- Upper
80 Series Pocket: 62 and 80 Series Land Cruiser Center Console Liner- Pocket
100 Series Upper: 100 Series Land Cruiser Center Console Liner- Upper


View attachment 1086723 View attachment 1086724 View attachment 1086726

Do you have the listing for the console lid Loop organizer 4 the lx450?

 

[NLXTACY]

Do you have the listing for the console lid Loop organizer 4 the lx450?

That is the APU-2
Accessory Panel Unit, 5"x8.5"

 

[Beanzermin]

Have had mine in my 100 series for about a year. Still looks amazing!

 

[NLXTACY]

Have had mine in my 100 series for about a year. Still looks amazing!

View attachment 1761160

So happy to see that!!

 

[Ohashimi]

Check this tray out. I've been 3D printing these out of ABS and Rubber and have been using mine for a few months now. I have them posted on Etsy if you guys want to check it out. link to the Etsy below.

98-2003 LX470 or Land Cruiser Center Console Insert tray -May fit other years as well