Calling all custom fabricators! (1 Viewer)

[SAR_Squid79]

Who can make a set of fenders for me for my Off-Road / Expedition Trailer?​

​

I'm trying to put the finishing touches on my trailer so I can get it out on the trail. The fenders that I currently have on there are too narrow. I'm afraid they could possibly cut the tire. Nobody out there seems to make a square fender wider than 8". Mine need to be like 12" wide.

They need to be:
12" wide
12" top to bottom
26" top surface
36" lower edge to lower edge

 

[airlaird]

Well Jamie I know that Adventure trailers does sell 12" wide fenders...but they are pricey.
airlaird

 

[SAR_Squid79]

Well Jamie I know that Adventure trailers does sell 12" wide fenders...but they are pricey.
airlaird

No they don't. I've been trying to get a set of their Chaser fenders for months now!

They won't sell me a set or tell me who makes them for AT.

 

[titanpat57]

Hi Jamie

There must be about a bazillion fabricating shops in San Diego..on top of all those ship builders that must moonlight on the side. Try putting a posting in Craigslist...I bet someone would whack those together in no time.

Good luck,
Pat

 

[Cruiserdrew]

It looks like something you could make yourself. Do you have a welder? Just extend what you have by 4-6 inches and you're good. I would also put rubber flaps front and rear to keep the random rock from being tossed into your rear window.

 

[D'Animal]

FC Fabrication in Stockton.

 

[Brian in Oregon]

Before spending money on custom fenders, you might want to check to see if commercial fenders are available first.

Northern Tool has about three pages of different fenders. Click the link and enter "fenders" in their search field.

Portable Generators, Pressure Washers, Heaters, Hand + Power Tools | Northern Tool + Equipment

 

[SAR_Squid79]

It looks like something you could make yourself. Do you have a welder?

I know that these shouldn't be difficult to make. If I had a welder, and had a clue how to weld - I'd be dangerous!!! My dad did all the welding on the trailer. I came up with the design, the hardware, and all the ideas. I just can't weld! (yet)

 

[SAR_Squid79]

FC Fabrication in Stockton.

Thanks for the tip. I just shot them an email.

 

[cruzzer]

I know my next door neighbor could make em for you cheap,, just drop the trailer off for a couple days and he will get to it,, just it will cost you a couple weeks pay to get it here,, and most likely a crapload of fuel..
AT only does the fenders in batches.. if your timing is right.. if not sol..

 

[Rubiconcruiser]

Jamie you re a brave lady, dont worry about the welding, guys can handle this..The fenders call Vic
818 727 1585 He will fab a set in the shop is days, Jim

 

[D'Animal]

Search Fender in Redneck Trailer supply website. They may already have what you are looking for.

Tractor Supply Company has a pretty good selection as well.

 

[jasonmt]

I know you can get a 13" wide single radius (round) fender that is 36" long and 20" high but a jeep style fender in those dimesions is likley not going to be a "off the shelf" part.

 

[TheGillz]

Jamie you re a brave lady, dont worry about the welding, guys can handle this..The fenders call Vic
818 727 1585 He will fab a set in the shop is days, Jim

OH, snap! Sexist about a dude!

 

[SAR_Squid79]

Jamie you re a brave lady. . .

Yeah . . . WHAT?!?!?

ME:

 

[boctor12]

I have a new set I just built for my M-416. I made some changes to the trailer after I built the fenders and they are not fitting how i want them. They are real nice, made out of 1" tubing with galvanized sheet metal. I also had them spray lined black. I am in Riverside. Let me know if you are still interested and I will upload a pic. My trailer has 33" tires and the fenders are 12" wide.

 

[46/71 Hybrid]

You pay shipping both ways and I'll do them for you for $3, enough to buy a couple whopper Jr's while I'm working on them.