Hey guys been a while but im finally back in the toyota family.
I could use some help tracking down a headlight issue. I bought a 96 4runner last week. basic sr5 not limited. all the test drives were in the day everything seemed great.
So my first night drive i had the first issue. The brights will come on but the dims... no such luck. when i turn the lights on no matter what position the switch is in blue light is on. when i am in the dim position no headlights at all just parking, when i push it forward the brights come on.
A buddy and I tested the relay with a volt meter and it gave the voltage and made the "clicking" noise. But i do not here any noise from relay, when it is plugged in, if i switch from brights to dim. The 2 headlight fuses are good.
The only other issue is that it had aftermarket foglights before i got it. Seller just cut them out. But they were on a switch not attached to the dims.
It also has aftermarket stereo that i didnt install with wiring there that ran an amp and subs(that are no longer there).
Im not the best with electrical issues but any help in pointing me in the right direction of where to check would be much appriciated.
Zac
I could use some help tracking down a headlight issue. I bought a 96 4runner last week. basic sr5 not limited. all the test drives were in the day everything seemed great.
So my first night drive i had the first issue. The brights will come on but the dims... no such luck. when i turn the lights on no matter what position the switch is in blue light is on. when i am in the dim position no headlights at all just parking, when i push it forward the brights come on.
A buddy and I tested the relay with a volt meter and it gave the voltage and made the "clicking" noise. But i do not here any noise from relay, when it is plugged in, if i switch from brights to dim. The 2 headlight fuses are good.
The only other issue is that it had aftermarket foglights before i got it. Seller just cut them out. But they were on a switch not attached to the dims.
It also has aftermarket stereo that i didnt install with wiring there that ran an amp and subs(that are no longer there).
Im not the best with electrical issues but any help in pointing me in the right direction of where to check would be much appriciated.
Zac
