I've got a 2010 LX570 with a pinhole in the HiPres AHC line that goes between Driver and Passenger rear shocks. It's at the 90 right where it turns "North" toward the drivers side shock. Is it possible to cut out the bad piece and put a double flare on it with a union, or cut the bad piece out and fit a piece of brake line in the rotted corner? I've done this with brake and fuel lines with good success. Or is there anyone that knows the part number for that line that goes between the rear shocks? Inital search has me at 200 bucks for that line and I know I can flare it for 10 bucks if it will work. Any thoughts let me know. Looks like a PITA to remove.
Also on a side note, Spoke with SLEE about an OME retrofit and the guy said they figured out the process to retro a 200 LX570 but there was no shocks available due to our little shipping supply problem. I would love to install the OME/SLEE kit as I put it on my 470 after chasing AHC gremlins for a number of years and the SLEE kit is awesome.
Also on a side note, Spoke with SLEE about an OME retrofit and the guy said they figured out the process to retro a 200 LX570 but there was no shocks available due to our little shipping supply problem. I would love to install the OME/SLEE kit as I put it on my 470 after chasing AHC gremlins for a number of years and the SLEE kit is awesome.