- Vehicle Model
- 25 Series
- 40 Series
- 45 Series
- 55 Series
- 60 Series
- 70 Series
- 80 Series
- 90 Series
- LX450
- 100 Series
- LX470
- 4Runner
- 4Runner Gen3
- 4Runner Gen4
- 4Runner Gen5
- GX470
- Prado 120
- GX460
- Prado 150
- 200 Series
- LX570
- GX550 / 250 Series
- LX600
- Minitruck
- T100
- Tacoma
- Tacoma Gen1
- Tacoma Gen2
- Tacoma Gen3
- Tacoma Gen4
- Tundra
- FJ Cruiser
- Sequoia
- Highlander
- Other
Con-Ferr Porthole Roof Rack in Birmingham, AL
$250 obo
Modular version (6' x 4' x 6") - 4 sections that bolt together, the ends have welded crossbars, the center sections bolt to the crossbar.
Refinished and new hardware, but no feet.
Barn find so it had some light rust and chipped paint. I stripped the paint and rust down to bare metal with a wire wheel, then sanded.
I applied multiple light coats of primer then multiple light coats of flat black enamel, Rust-Oleum Industrial Enamel.
Originally, the center sections had welded brackets that bolt to the crossbar, but the weld failed on one so I bolted the brackets to the center section (see pics).
$250 obo
Modular version (6' x 4' x 6") - 4 sections that bolt together, the ends have welded crossbars, the center sections bolt to the crossbar.
Refinished and new hardware, but no feet.
Barn find so it had some light rust and chipped paint. I stripped the paint and rust down to bare metal with a wire wheel, then sanded.
I applied multiple light coats of primer then multiple light coats of flat black enamel, Rust-Oleum Industrial Enamel.
Originally, the center sections had welded brackets that bolt to the crossbar, but the weld failed on one so I bolted the brackets to the center section (see pics).
