Anybody running steel rock crawlers?

[Imola Red]

I'm not sure of the offset for the 100's but I want to see if there is a 16" black steelie that will fit the 100's.

Would love to see some pic's if anybody does. If not then just the offset and where to get them would be great.

 

[dclee]

I could be wrong, but I don't think the Rockcrawlers, or most other aftermarket wheels, have our bolt pattern. There are a few that do, but that ones I've seen for the 100 have been of the more bling variety.

 

[calamaridog]

www.stocktonwheel.com

They have offered to make the Explorer 72 steel wheel in the correct size and offset for around $150 per wheel, as previously discussed in this forum.

 

[hoser]

16x8 with a +60mm offset is the stock specs.

If going 8" width, you can go down to a +35mm offset. That would give you an added 2" of track width.

16x9" with a +48mm offset should work fine too.

 

[ats4x4dotcom]

One thing we have found with the rockcrawlers is the gloss powdercoat can allow the rim to slip in the tyre at low pressures.

We buff the powdercoat where the tyre bead sits to rough it up, and we fit all our 4wd tyres dry on the rim, so there is no lube to help the tyre slip on the rim.