Any Opinion of Oregon Engine Rebuilders - Sandy Oregon??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Solace in Solitude

Solace in Solitude

10 Year
Joined
Feb 4, 2014
Threads
125
Messages
7,185
Location
Las Vegas
I'm not sure in which forum this belongs...

But, I'm looking for 'technical references' - good and/or bad - regarding

Oregon Engine Rebuilders, Inc.
20740 SE Firwood Road
Sandy, OR 97055

Anyone??

Thanks!!
 
also contact matt and land cruiser NW. i have dealt with both, although not for an engine rebuild. both are competent in what they do. tim is more into modified vehicle in my opinion, but would do a good job on any 2f rebuild. matt is more into stock vehicle and retaining that i would say. and again, he would do a good job on a rebuild too. personally i would lean more towards matt for this particular chore.

i had tim quote me a rebuild on my 78 2f with similar issue you are having. said to budget $8000 all said and done. when i asked matt, told him issues, he said he would happily do it, but recommend i just drive it until its completely dead.

andy
 
Bones said:
also contact matt and land cruiser NW. i have dealt with both, although not for an engine rebuild. both are competent in what they do. tim is more into modified vehicle in my opinion, but would do a good job on any 2f rebuild. matt is more into stock vehicle and retaining that i would say. and again, he would do a good job on a rebuild too. personally i would lean more towards matt for this particular chore.

i had tim quote me a rebuild on my 78 2f with similar issue you are having. said to budget $8000 all said and done. when i asked matt, told him issues, he said he would happily do it, but recommend i just drive it until its completely dead.

andy
Click to expand...


Thanks Andy!

That's what I'm going to do... drive it until one of us dies or I find a good replacement 2F. But, I like to know what's down the road... just in case.
 
Portland engine rebuilders are good, I've had 4 engines I've taken to them and had built one was my 2f around 4yrs ago and have had 2 383 strokers with ported and polished head and oversized valves and a 390 ford taken 60 over. All had a a one year or a milage on them, I could blow it up and they would fix it and not play 20 questions with you. At least give them a call they have stuff on hand also.
 
Tim and Matt are pretty over priced one what they have and labor in my opinion I would shop around landcruiser new does mostly newer last I talked to them but landcruiser specialties does 40 and 60s but he does have a big storage unit if you need parts and can't find them but you gotta bug him a lot to get things done
 
yotafj said:
Tim and Matt are pretty over priced one what they have and labor in my opinion I would shop around landcruiser new does mostly newer last I talked to them but landcruiser specialties does 40 and 60s but he does have a big storage unit if you need parts and can't find them but you gotta bug him a lot to get things done
Click to expand...


All good to know - thanks for sharing!!
 
You must log in or register to reply here.

Share this page

Back
Top Bottom