Curious if anyone knows any bay area shops that can do some wirebrush, POR, or woolwax. While this is something I could probably do, hiring someone with a lift seems like it would make this way easier.
Any bay area shops that can do some light rust treatment?
- Thread starter Carolinapanic
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Following.
I used wire brush and por15 last year and while it got the job done, it was messy as hell. Also the por15 is really toxic plus very hard to remove if you get it on yourself.
I used wire brush and por15 last year and while it got the job done, it was messy as hell. Also the por15 is really toxic plus very hard to remove if you get it on yourself.
I used this on my Tundra frame with surface rust followed by Woolwax. Eastwood Black Rust Encapsulator - Paint Over Rust - https://www.eastwood.com/eastwood-black-rust-encapsulator-paint-over-rust.html
Has held up great. Would highly reccomend.
Has held up great. Would highly reccomend.
- Thread starter
- #5
It's not bad at all. Basically just need a lift and an hour or two to do some some brushing and light coating on some axle seams on a 2017.