AC Evaporator Box and expansion valve

[tmxmotorsports]

Here ya go @Seth_O

 

[NearJetties]

I used a Denso expansion valve and Toyota pressure switch and what @tmxmotorsports posted looks nearly identical except the curly Q end on the expansion valve tip. It also matched exactly what came out.

 

[Seth_O]

Here is what I ordered, as I found multiple places that stated this was the same OE supplier that comes in the Toyota marked box:

But this is how it goes together:

That doesnt seem right to me....

 

[NearJetties]

I don’t see why the adapter would make any difference but it is not what I used.

Below is what I used is for a 62. The evap and expansion valve are the same for a 60.

evaporator: Denso DNP-476-0072
Expansion valve: Denso DNP-475-0101
pressure switch: Toyota 88645-30250
Compressor: Denso 471-1433
Drier: Denso 478-0101 (not for r134a, I’m running envirosafe r12a)

cross referenced these #s on several posts here and coolstream.

MUD - Land Cruise Parts and Pricing, Coolstream Auto AC | Tucson AZ

MUD - Land Cruise Parts and Pricing at Coolstream Auto AC, Tucson AZ. Got more questions? Call us at 520-918-3604. Land Cruiser parts resources.

www.coolstreamac.com

 

[Seth_O]

The adapter steps the thread size down. I believe it's also causing me to have a really slight leak.