This is likely a dumb question. I have a 99 4runner., sr5 4wd, 3.4. I am swapping the transmission, old one died, found a good used one. It has an a340f and integrated transfer case. The one I recieved still has the transfer case attached. I was told I was only getting the AT. My question is, can you split the transfer case from the transmission? I assumed I would not be recieving a transfer case, but I now have two.
A340F and Transfer case question
- Thread starter FlashBang
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Duane
IH8MUD Wookie
certainly., it has to! Maybe get into the manual for it at the top of the 95 section..you can pull off a manual for your truck and find pictures to assist.
or here is a link to the manuals http://www.ncttora.com/fsm/index.html
or here is a link to the manuals http://www.ncttora.com/fsm/index.html
- Thread starter
- #3
There is clearly a proceedure for it in the FSM, but I read somewhere that there are combinations that do not come apart. I just can't figure out why the salvage yard sent the tcase. I guess I will call him. Thanks.
Duane
IH8MUD Wookie
definitely a t-case, 2 output shafts?
- Thread starter
- #5
Oh yes, it is a tcase for sure. A shaft going north and one south, unles of course the truck is facing a different direction;p.
