Parting Out 96 lx450 n fla (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Interested in the exhaust "Y" pipe back to the flange under the "B-Pillar" past the CATs. Could potentially use just Y Pipe and O2 sensor if shipping kills the hole piece. Let me know. Would need shipped to CT 06437.

Don't have the pipe.
Seats and steering wheel were sold
 
I'm interested in the interior rear view mirror if it is in good shape. Any pics of that by chance? Price to 22134.
 
I'm looking for the female side of the plug for the rear locker. This will be the connector that the rear locker harness plugs into. It's located on the drivers side rear by the frame.

I believe all 96,97 lx450's have this even if it is not equipped with lockers.

Thank you!!

I have paypal or can meet if local to Denver.


I have a picture here. (4x4CPOSEADOG pictures ) Looking for the "Rear diff lock connector"
rear-diff-lock-harness-jpg.313848

5-wire-pin-jpg.313849
 
Looking for grab handles (prefer the passenger front overhead handle not the pillar handle), and rear hatch wiper relay box. Is the interior tan/oak?
 
Looking for rear non locking third member without rust.
 
Sounds like these are gone or broken, but I am looking for both driving side vents that are on either side of steering wheel/gauge cluster.
 
Need driver side seatbelt if oak interior
 

Users who are viewing this thread

Back
Top Bottom