Parting Out 94 cruiser in western co

[noahfecks]

So I bought this land cruiser site unseen and lets just say it wasnt what I expected it to be. It was in an accident on the passenger side I had hoped to get it back on the road but I dont believe it would be a safe vehicle and I dont want someone getting hurt on my conscience (rust problems not collision damage). It has a lot of very usable parts to perhaps keep someone else on the road so to recoup some of my money I will part it out. It is brown in color with a brown interior, the passenger side doors are toast but the internals appear to still work if you need a window motor or something. I will list a few of the major components with some prices if you need something specific please just ask, this is currently a running driving rig come get the whole thing for $2500

Front axle (no locker) and rear axle (aussie locker) $1050/pr
What appears to be a very good engine with 202K $700
Trans $300
T-case $300
Front seats $75/ each
Drivers side doors $100/ea

Lots of small parts, everything is negotiable. Will take the carcass to the crusher in one month after I have pulled the things I know I can sell off of it.


EDIT: Carcass has gone to the crusher, still have anything that was useable

 

[Shooter307]

PM Sent

 

[Moabred]

What is included in the "whole front clip $400"? I'm looking for passenger side headlight, corner light, and the plastic corner for the bumper. Also interested in bumper, passenger side front fender and flare. Cosmetic appearance isn't a big factor, as long as they're functional and in better shape than what I have.

I have family in Moab who might be able to pick up the parts for me depending on where you are in Colorado.

 

[noahfecks]

What is included in the "whole front clip $400"? I'm looking for passenger side headlight, corner light, and the plastic corner for the bumper. Also interested in bumper, passenger side front fender and flare. Cosmetic appearance isn't a big factor, as long as they're functional and in better shape than what I have.

I have family in Moab who might be able to pick up the parts for me depending on where you are in Colorado.

Red I am as close to Moab as CO gets, right over the border on I-70. Front clip I was thinking fenders, lights, core support, grill

I looked online for prices and here is what I came up with (all prices are salvage yard low price):
Fender with flare $125
Headlight assembly $75
Marker light $30
Front bumper $125

total salvage yard price $355, how about $280

 

[be18see1]

Is it cloth? Can you quote me drivers side rear door panel shipped to 43062? Mine is destroyed by the PO who didn't know how to remove a door panel...

Also, I'm interested in the little black posts with a ball on the end that snap into the back of the mirror along with the grommet that protects them. You can pull them out of the mirror motor unit once the mirror pops off. These could be shipped via regular mail I think. Thanks! Sam

 

[noahfecks]

Is it cloth? Can you quote me drivers side rear door panel shipped to 43062? Mine is destroyed by the PO who didn't know how to remove a door panel...

Also, I'm interested in the little black posts with a ball on the end that snap into the back of the mirror along with the grommet that protects them. You can pull them out of the mirror motor unit once the mirror pops off. These could be shipped via regular mail I think. Thanks! Sam

I wont be able to go look at the rig till the weekend and I can find out about shipping for you then. If you are asking for parts from the rear view mirrors on the doors i will only be selling them as complete units, sorry but it doesnt make sens to . They are in good working order, not floppy and loose like most that you find, but I would be glad to sell you one or both of them as complete units if you like, I can check on shipping for you along with the door panel.

 

[Bode]

What is the condition of the upper and lower tailgates? If not involved in the accident and in good condition, I'd be interested in both. Can you please shoot me a price and shipping to 82801? Thanks!

 

[FamCruiser]

Does it have lift springs and shocks? Centre lock diff button?

 

[Bullit8169]

How much for the VAF meter

 

[noahfecks]

What is the condition of the upper and lower tailgates? If not involved in the accident and in good condition, I'd be interested in both. Can you please shoot me a price and shipping to 82801? Thanks!

The tailgates work well and the glass is good but they have some surface rust on them. How about $200 for the pair? I can check on shipping but it may be better to try and use someone on mudship.

Does it have lift springs and shocks? Centre lock diff button?

No lift or CDL button

How much for the VAF meter

Not sure I am ready to part with it yet, I would like to sell the motor, before I sell a part that is needed to run it.

 

[js82181p]

Hi,

How much for the third row right side seatbelt shipped to 10509?

Thanks!

 

[noahfecks]

Hi,

How much for the third row right side seatbelt shipped to 10509?

Thanks!

Looks like the junk yards get $35/ea for seatelts, how about $30 shipped? To confirm you need brown drivers side

 

[be18see1]

I wont be able to go look at the rig till the weekend and I can find out about shipping for you then. If you are asking for parts from the rear view mirrors on the doors i will only be selling them as complete units, sorry but it doesnt make sens to . They are in good working order, not floppy and loose like most that you find, but I would be glad to sell you one or both of them as complete units if you like, I can check on shipping for you along with the door panel.

Sounds good. Please let me know. Thanks!

 

[voodoojk]

Looking for tool kit, specifically all the handles to lower the spare. I have a jack already. Also, drivers side visor if interior is tan?

 

[Outsiderbox86]

How much for front passenger side spindle and maybe hub. Shipped to California thanks

 

[noahfecks]

Looking for tool kit, specifically all the handles to lower the spare. I have a jack already. Also, drivers side visor if interior is tan?

Yes I have the tool kit and the visor in good shape How about $50? Where in CO are you, maybe we can not have to ship.

How much for front passenger side spindle and maybe hub. Shipped to California thanks

Thanks for your interest, the front axle is available as a complete unit.

 

[noahfecks]

Sounds good. Please let me know. Thanks!

Shipping is $23 for the door panel how about $60 shipped? Shipping on mirrors is $33 How about $150 shipped for both mirrors?

 

[voodoojk]

Pm sent

 

[be18see1]

Shipping is $23 for the door panel how about $60 shipped? Shipping on mirrors is $33 How about $150 shipped for both mirrors?

Pm'd

 

[Deftoned40]

Need exhaust downpipe piece. It connects the header to the cat with flanges on both ends and has an o2 in it. I need the side closest to the motor(I think they call that side the back,not sure though). Please let me know as I m in need on this right away so I can sell my 93. Thx..