94/95 80 Series - Parting out -17K

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I'm looking for a rear upper hatch locking mechanism. The entire thing- it locks/ opens the rear hatch.

You have to remove the upper hatch trim plastic to get to it, and remove about 4 10mm bolts to get it out. Also need the exterior grab handle that is attached to it. (tricky to remove).
 
Do you have the Center console. I need the lower part. Don't care what the shape is.

Thanks
 
I'm looking for a rear upper hatch locking mechanism. The entire thing- it locks/ opens the rear hatch.

You have to remove the upper hatch trim plastic to get to it, and remove about 4 10mm bolts to get it out. Also need the exterior grab handle that is attached to it. (tricky to remove).

sorry, don't have it.
 
Do you have the Center console. I need the lower part. Don't care what the shape is.

Thanks

yes I do, I'll pull it tonight and snap a photo to show condidion - even though you don't care what shape it's in.
 
Any interest in selling just the rear axle shafts?

Yes, I have them out of the axle already - posted where you asked about them somewhere else I think - Eric said I had some???
 
Hey, I am in need of a drivers side front fender flare.
Also if they haven't been taken yet, the springs,shocks,and seats I am interested in. I'm in texas zip 78130.
Let me know thanks.

Don't have the front flare - I do have the springs, shocks and seats - all 6. I snapped some photos of the seats this past weekend I can e-mail to you. They're in pretty good shape, they were a bit dirty from sitting, but I wiped them down with soapy water and they cleaned up better than I thought they would, and leather is still soft, a little more detailed cleaning and some leather treatment, and they'll be great. I can send an e-mail with the photos if you like (high res).
 
If you still have the ECU part #89661-60221, I'm interested.

Thanks

Pete

Let me see if I can pull it tonight or tomorrow and make sure it's the same #.
 
Hey do you have an instrument cluster, a climate control air con panel (push button type), and a grey handbrake lever assembly.

If so will you ship to Australia and how much.


Shipping to australia would kill the price...
 
How about the front Driver's side ABS sensor?

Shipping to 86314?


Edit:

Also need a radiator fan shroud...?

no fan shroud - woudl like to keep ABS sensor w/ the front axle and sell it as a whole unit - sorry
 
I'm interested in the rear door lock assembly (drivers and passengers), the entire drivers lock/window control assembly (marked as "Driver's Door Lock Manual Switch" in the FSM), the passengers lock/windows control assebmly (same), and any dash switches/buttons you might have left.

Also might be interested in a couple of grab handles (such as the ones above the 2nd and 3rd row, the straight ones) depending on color.

Does it have the jack/tools?

Shipping to 97502.
 
Hey, I am in need of a drivers side front fender flare.
Also if they haven't been taken yet, the springs,shocks,and seats I am interested in. I'm in texas zip 78130.
Let me know thanks.

Here's a shot of all the seats - I have images twice this size for each one front and back to give an accurate idea of condition, though I obviously can't post them here.
all seats small view.webp
 
Do you have the window regulators, motors, and maybe even the glass runs? My glass is good, but I'm trying to nail down why my windows are so god awful slow. Let me know if you think they are in good shape. Thanks!
 
Not sure what you have left...

Looking or leather floor shifter knob for my '93 and leather wrapped steering wheel if you still have them
 
I'd be interested in one of the rims, shipped to 95826, preferably without a tire, if that's possible. It should fit onto a 97, right?
 

Users who are viewing this thread

Back
Top Bottom