- Location
- United States
Complete engine including power steering, edic motor, alternator, starter, fan, flywheel and used clutch. I can include an alloy or iron bellhousing.
Inline pump.
Engine is from and Australian BJ73 with 230K KM (under 150k miles). I received it in October and just test fired and tested it today. Running it on a stand so only a little warm - not full operating temp. Being from AU its not all rusty and crusty like some engines from CA.
Compression 1 - 440, 2 - 430, 3, 420, 4 - 435. Cold oil temp about 80 psi - it dropped down to about 60 psi at slow idle before I shut it down. Seems normal to me. Seemed to run well, no smoke or odd noises.
Includes new NGK 10.5v glow plugs. If I can find an edic relay Ill include it.
$2700 located in Portland, OR. Preference to local or semi-local sale but I can assist with shipping. I may have access to a 40 series 4 speed for additional cost.
Inline pump.
Engine is from and Australian BJ73 with 230K KM (under 150k miles). I received it in October and just test fired and tested it today. Running it on a stand so only a little warm - not full operating temp. Being from AU its not all rusty and crusty like some engines from CA.
Compression 1 - 440, 2 - 430, 3, 420, 4 - 435. Cold oil temp about 80 psi - it dropped down to about 60 psi at slow idle before I shut it down. Seems normal to me. Seemed to run well, no smoke or odd noises.
Includes new NGK 10.5v glow plugs. If I can find an edic relay Ill include it.
$2700 located in Portland, OR. Preference to local or semi-local sale but I can assist with shipping. I may have access to a 40 series 4 speed for additional cost.
Last edited: