80-Series Battery Tray Bar With Accessory Plate, Driver Side USDM, FZJ80 Toyota Land Cruiser

[GCRad1]

Battery Tray Bar With Accessory Plate, Driver Side USDM, 80-Series FZJ80 Toyota Land Cruiser
Battery Tray Bar With Accessory Plate, Driver Side USDM, 80-Series FZJ80 Toyota Land Cruiser - Red Line Land Cruisers - https://redlinelandcruisers.com/shop/engine/electrical/battery-tray-bar-with-accessory-plate-driver-side-usdm-80-series-fzj80-toyota-land-cruiser/

KIT INCLUDES:
• Battery Tray Bar
• Accessory Plate
• Corner Washers
• J-Hooks + Flanged Washers (Toyota)
• Metric hardward to connect Accessory Plate to Tray Bar

Coming soon: Dual Battery / Passenger Side Battery Tray Bar for 1991 – 1992 FJ80

 

[NeverFinis]

Is it possible to mount a Blue Sea ML-ACR to the accessory plate? I couldn't find the dimensions of the plate, but the ML-ACR bolt holes are 4.5" by 3"

 

[tmxmotorsports]

View attachment 2938156
View attachment 2938160

Battery Tray Bar With Accessory Plate, Driver Side USDM, 80-Series FZJ80 Toyota Land Cruiser
Battery Tray Bar With Accessory Plate, Driver Side USDM, 80-Series FZJ80 Toyota Land Cruiser - Red Line Land Cruisers - https://redlinelandcruisers.com/shop/engine/electrical/battery-tray-bar-with-accessory-plate-driver-side-usdm-80-series-fzj80-toyota-land-cruiser/

KIT INCLUDES:
• Battery Tray Bar
• Accessory Plate
• Corner Washers
• J-Hooks + Flanged Washers (Toyota)
• Metric hardward to connect Accessory Plate to Tray Bar

Coming soon: Dual Battery / Passenger Side Battery Tray Bar for 1991 – 1992 FJ80

Cool looking piece.

 

[tmxmotorsports]

Is it possible to mount a Blue Sea ML-ACR to the accessory plate? I couldn't find the dimensions of the plate, but the ML-ACR bolt holes are 4.5" by 3"

Wouldn't have even looked at this if you didn't lol

 

[NeverFinis]

It is. I remember seeing it way back. I have their PSC Reservoir mount for LS engine. However, I haven't gotten any response from them about sizing, including direct email...but they maybe on vacation, etc...things happen.

I moved the starting battery to the passenger side on my LS Swap, and now have way too much stuff there to wire in a winch properly, and its cutoff switch. This Battery Tray Bar With Accessory Plate would be perfect.

I didn't want to add a second battery, in addition to a house battery, but now I think I have to. Revisiting the pictures, I don't think the plate will fit my Blue Sea ML-ACR, but Blue Sea has the SI-ACR Automatic Charging Relay that is much smaller and should fit.

 

[NeverFinis]

@RLMS and @GCRad1 Are you guys still on ih8mud? Looking to buy this item but store is down.

 

[matzell]

@RLMS and @GCRad1 Are you guys still on ih8mud? Looking to buy this item but store is down.

Give them a phone call....I spoke with them the other week.

 

[NeverFinis]

@Bisonthecruiser Speak your mind.

 

[Bisonthecruiser]

@Bisonthecruiser Speak your mind.

You can click their usernames or shoot them a message. At least one of these guys has logged in within the last week.

 

[NeverFinis]

You can click their usernames or shoot them a message. At least one of these guys has logged in within the last week.

Uhm, really? I didn't know you could do that.... You can tell when people have logged in? Really? This internet thing is wild...

People throw shade for stupidest s***...

Just so you know, there are vendors who do not read PMs. (e.g. DeltaVS). I prefer not to send PMs if it doesn't need to be private. Sizing information doesn't need to be private.

And, yes, I knew they were on ih8mud within a day of my first post on this thread.

The battery tie down was ordered earlier. I can make it work for my purpose. Not my first order with them, as seen in post #5 in this thread.