SOLD 80 series 3rd's w/ 5.29's and lockers DENVER

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 13, 2006
Threads
18
Messages
275
Location
Parker, CO
I am selling a set (front and rear) of Toyota 3rd members (diffs) with 5.29 gears and Aussie locker (rear) and ARB locker (front) with compressor and switches. These will drop into a 91-97 Toyota Land Cruiser and Lexus LX450.
**Please note I need your factory core diffs in exchange!**
I am selling my 96 Land Cruiser soon but returning it back to stock first. Please let me know if you have any questions.
I ran this setup for about 2 years with 37's. Drove great and very streetable, was daily driven. ARB locker will need a new o-ring before installing but that is recommended anyway.

$1400 OBO PRICE CUT MUD DISCOUNT with exchange for stock core diffs

In CO and would rather make a local deal.

7C8FC8AF-51C7-49A8-94EE-859164111AF2.jpeg
 
Last edited:
I am selling a set (front and rear) of Toyota 3rd members (diffs) with 5.29 gears and Aussie locker (rear) and ARB locker (front) with compressor and switches. These will drop into a 91-97 Toyota Land Cruiser and Lexus LX450.
**Please note I need your factory core diffs in exchange!**
I am selling my 96 Land Cruiser soon but returning it back to stock first. Please let me know if you have any questions.
I ran this setup for about 2 years with 37's. Drove great and very streetable, was daily driven. ARB locker will need a new o-ring before installing but that is recommended anyway.

$1700 with stock core diffs

In CO and would rather make a local deal.

View attachment 3263115
So two complete locked third members? Basically a direct drop in for a unlocked 96'?
^aside from the axle shaft being too small.

I could happily swap you my stock third members. In Denver too
 
This is a smokin deal!!! Wish I would have seen this a few weeks ago!!
 
What type of compressor is included? I just completed a complete engine rebuild, TC rebuild with low range and was about to start a a complete F/R axle rebuild and regear.
 

Users who are viewing this thread

Back
Top Bottom