The past few months we have been busy in R&D coming up with a catch can system for forced induction engines . This was our 2nd try . We found this imported can not enough for what we wanted for Forced induction, but perfect for Non forced induction FZFE's.. Even with this simple can We caught about 1oz of oil per 1000 miles on our 3 test rigs over the past 6 months. These are in very limited #s..I bought enough to make a small run before going in a different direction and designing our own 6 chamber made in the USA can just for the 80 series. We will release them next week,
Kit includes a Catch can with simple filtration ( requires a drain with every oil change) our lazer cut epoxy painted bracket (such a small run we opted out to powder coat) . nylon braided 6an hose, and 6 an fittings. 6an line separator, a new pcv to give everything a clean look and all hardware to install which requires a 12mm socket, flat head screw driver, allen wrench and 1/2 hr of your time.
These kits are priced move fast. $250 which includes shipping to the lower 48. I am not putting them on our web site due to the small amount we have. You can paypal me at Precisionlandcruisers@gmail.com or to use a card... DM email or call 719 757 0181 and I can give you instructions on how to order through our web site.
Kit includes a Catch can with simple filtration ( requires a drain with every oil change) our lazer cut epoxy painted bracket (such a small run we opted out to powder coat) . nylon braided 6an hose, and 6 an fittings. 6an line separator, a new pcv to give everything a clean look and all hardware to install which requires a 12mm socket, flat head screw driver, allen wrench and 1/2 hr of your time.
These kits are priced move fast. $250 which includes shipping to the lower 48. I am not putting them on our web site due to the small amount we have. You can paypal me at Precisionlandcruisers@gmail.com or to use a card... DM email or call 719 757 0181 and I can give you instructions on how to order through our web site.
