Parting Out 75 FJ40 project (WA)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 24, 2004
Threads
96
Messages
1,599
Location
Monroe, WA
I'm not sure this counts as parting out since most of it already in parts, but I haven't put together a list yet, so here goes:

Owned by a friend; I'm helping him sell it off. I would really love it if it went at once to get it out of my driveway and garage but I'm probably going to be parting this out. Located in Monroe, WA (Seattle-ish). Serious inquiries? Ask away.

Almost everything has zero miles (either new or rebuilt) except the used soft top/doors

Quick rundown:
Aqualu: tub, cowl, bib, tailgate, w/s frame, half doors(SOLD), custom steel rear quarter protection
Orion t/c (SOLD)
Longfields, 4.88s, Chromo rears, ARBs
SBC adapter (Mark's?) to stock 4-speed
No motor (bad SBC block in place for mount mock-up)
Painless wiring kit
lots of stainless bolt and hinge kits.
MT tube fenders and sliders
4" springs
Saginaw P/S and IPOR high steer

Comes with the original cowl (for the VIN) and a clean title.

Has some drawbacks though:
the tub was used and while it's clean and straight, it doesn't match up with the cowl exactly at the door seam (may be an older version?). Despite this, the tub and cowl have been welded together. It may be possible to separate them, but I don't have the time or patience to try to do it cleanly.
Also, the frame does not match the title. I seem to recall that the original was rusty, so my friend bought this one locally and had it cleaned up to use. I have been unable to locate any paperwork for this frame, so that may be a headache but I'm not familiar with what that entails.

I'm overly occupied with getting my house finished before the weather changes. So I will do my best to answer questions and keep this updated, but I do not currently have time to ship things. Maybe in October.

Asking $13K for everything, but I don't have set prices for most of the parts yet. I'll try to reply with prices as I have time but offers are fine with me in the mean time if you see something you need.

Pictures: fj40eric's Library

IMG_2719.JPG
 
Last edited:
I would be interested in the front and rear 3rds with 4.88s and arbs.
 
I would be interested in the front and rear 3rds with 4.88s and arbs.

Unless this all sits here for another month, I'm not planning to part out the axles. But if I get there, I'll let you know.
 
Do you have the fuel door and lock?
 
Do you have the fuel door and lock?

Sorry - not sure. Injured my leg yesterday and am laid up in bed for a couple days. When I can, I'll look through the bins of factory parts to see if there's one in there.
 
PM sent on parts
 
Looking for the radiator support struts! Please let me know if you have them. Thanks
I don't think I've seen those but I'll keep an eye out for them. It looks like the aftermarket radiator has a different support rod setup but I haven't quite sorted out how it goes together. I'll let you know if I find something for you.

Eric
 
Looking for wiperparts, all of it
All the seat brackets for the front,
Dash switches, front windshield,
All 4 corner lights. Anything still left?
 
Interested in the front bib, any emblems you have, and the small lower DS dash pad (above gas pedal by ignition key side). PM me a price mailed to 96712. Thanks!
 
I'm not sure this counts as parting out since most of it already in parts, but I haven't put together a list yet, so here goes:

Owned by a friend; I'm helping him sell it off. I would really love it if it went at once to get it out of my driveway and garage but I'm probably going to be parting this out. Located in Monroe, WA (Seattle-ish). Serious inquiries? Ask away.

Almost everything has zero miles (either new or rebuilt) except the used soft top/doors

Quick rundown:
Aqualu: tub, cowl, bib, tailgate, w/s frame, half doors, custom steel rear quarter protection
Orion t/c (SOLD)
Longfields, 4.88s, Chromo rears, ARBs
SBC adapter (Mark's?) to stock 4-speed
No motor (bad SBC block in place for mount mock-up)
Painless wiring kit
lots of stainless bolt and hinge kits.
MT tube fenders and sliders
4" springs
Saginaw P/S and IPOR high steer

Comes with the original cowl (for the VIN) and a clean title.

Has some drawbacks though:
the tub was used and while it's clean and straight, it doesn't match up with the cowl exactly at the door seam (may be an older version?). Despite this, the tub and cowl have been welded together. It may be possible to separate them, but I don't have the time or patience to try to do it cleanly.
Also, the frame does not match the title. I seem to recall that the original was rusty, so my friend bought this one locally and had it cleaned up to use. I have been unable to locate any paperwork for this frame, so that may be a headache but I'm not familiar with what that entails.

I'm overly occupied with getting my house finished before the weather changes. So I will do my best to answer questions and keep this updated, but I do not currently have time to ship things. Maybe in October.

Asking $13K for everything, but I don't have set prices for most of the parts yet. I'll try to reply with prices as I have time but offers are fine with me in the mean time if you see something you need.

Pictures: fj40eric's Library

View attachment 1529204
 
Interested in the front bib, any emblems you have, and the small lower DS dash pad (above gas pedal by ignition key side). PM me a price mailed to 96712. Thanks!

I'm out of town for a couple weeks. I'll get back to you around new year's. No emblems that I recall seeing and I'll have to check the condition of the dash pad.
 

Users who are viewing this thread

Back
Top Bottom