4runner fog lights in a GX460 (3 Viewers)

[WTITW]

Anyone used a 4runner fog light kit in a 10-13 GX? Housing looks exactly the same, and Diode dynamics has the same part numbers for both.

 

[tech703]

the bolt pattern i believe is the same

 

[re_guderian]

Can't speak to the match, but just a plug for the Diode Dynamics dual pattern fogs. I have them in my Victory front bumper, and absolutely love them. Way worth the money. Aim them judiciously, and you'll get more out of them than the (lame-O) OEM low beams...

 

[WTITW]

Thx. Auxbeam is sending me a ton of stuff to convert my OEM halogen and HID to their LEDs. I'll make a video comparing OEM intensity and beams going from Halgen/HID to all LED. I'll bust out the light meter for data. They only had the 4runner specced on their fog kit but sending them to me to try so I should be able to confirm soon.

 

[tech703]

Thx. Auxbeam is sending me a ton of stuff to convert my OEM halogen and HID to their LEDs. I'll make a video comparing OEM intensity and beams going from Halgen/HID to all LED. I'll bust out the light meter for data. They only had the 4runner specced on their fog kit but sending them to me to try so I should be able to confirm soon.

how do you get this treatment, i’m wiling to test stuff for 14+

 

[re_guderian]

Thx. Auxbeam is sending me a ton of stuff to convert my OEM halogen and HID to their LEDs. I'll make a video comparing OEM intensity and beams going from Halgen/HID to all LED. I'll bust out the light meter for data. They only had the 4runner specced on their fog kit but sending them to me to try so I should be able to confirm soon.

Looking forward to it. OEM halogens low beams suck. Aftermarket LED's in OEM low beam housings suck marginally less. 9011 halogens trimmed to fit the high beam housing rock. I couldn't find a combo of LED high beam and a controller that wouldn't flicker in DRL mode, but no one was shoveling parts my way, so I was budget constrained on finding a solution.

 

[185]

Thx. Auxbeam is sending me a ton of stuff to convert my OEM halogen and HID to their LEDs. I'll make a video comparing OEM intensity and beams going from Halgen/HID to all LED. I'll bust out the light meter for data. They only had the 4runner specced on their fog kit but sending them to me to try so I should be able to confirm soon.

Can you also please post led lumen output upon cold start and say after 30 minutes, as most leds start strong and then drop off in output? Any long term tests, like how these bulbs perform after a year or two?

 

[r2m]

Thx. Auxbeam is sending me a ton of stuff to convert my OEM halogen and HID to their LEDs. I'll make a video comparing OEM intensity and beams going from Halgen/HID to all LED. I'll bust out the light meter for data. They only had the 4runner specced on their fog kit but sending them to me to try so I should be able to confirm soon.

I'd love to see that video along with some lumen comparisons for the headlights and even interior. Although I don't want "night sun" brightness for the interior, but a little brighter with a warm tint would be ideal, for me at least.