3D printable magsafe charger that replaces the factory ash tray (files attached) (5 Viewers)

[Obioban]

Same file in 3 different formats:
3MF: Dropbox - https://www.dropbox.com/scl/fi/qil7eq7cult9fi14at9lw/Magsafe.3MF?rlkey=ois8esoysfo1jfzrf65yhchh0&st=f95siehj&dl=0
Solidworks part: Dropbox - https://www.dropbox.com/scl/fi/6lmq50haa6w3ia59syu2f/Magsafe.SLDPRT?rlkey=0bxmarsh12s18ezxlrau16bg5&st=e2yzn2dl&dl=0
STEP file: Dropbox - https://www.dropbox.com/scl/fi/0silwqmmyu90lilg5wspc/Magsafe.STEP?rlkey=4u7dswifu988vima2zjow0y5o&st=joa7pmk1&dl=0

Looks like this:

Or, installed:

How I wired mine you can see here, but you can wire it up however you want.

Entirely possible I'll be updating this in a couple weeks when the new iPhone comes out.

 

[Obioban]

How I wired mine and more installed pics....

Removed the cigarette lighter from the dash, and came up with this contraption to keep it from loosening behind the dash and prevent any shorts

Tray with MagSafe puck

150W GAN charger that should be able to power ~anything to replace the cig lighter I removed

With my Pro Max sized iphone

With my wife's normal size iPhone.

All on ignition switched power, so it can't drain the car battery.

In terms of not 3d printed parts I used...
Magsafe puck
GAN charger

My intention is to combine this with the GROM wireless carplay adapter, to have all the modern car tech I care about.

 

[hoothoot]

Photos are broken for me for some reason, but this is super cool!!

 

[Obioban]

Photos are broken for me for some reason, but this is super cool!!

Hopefully fixed now. Looks like the image format I used wasn't compatible with all browsers.

 

[hoothoot]

Hopefully fixed now. Looks like the image format I used wasn't compatible with all browsers.

Yup, all good now. Great install.