31/10.50

[jhinnepal]

Hey everyone. Working on getting my 2” Ironman lift to Nepal. Shipping is still being delayed because of the pandemic.

Is anyone running 31/10.50r15s on a 2” lift? If so, care to share a photo?

Really appreciate this forum and everyone’s advice and knowledge. Been extremely helpful.

JH

 

[ceebs87BJ]

Here's my BJ70 with OME lift and 31x10.5x15 tires. Not the best picture, and I think 33s would fill out the wheel wells a lot better, but I like how the 31s drive. I was worried about anything larger and stock (3.7) gearing.

 

[jhinnepal]

Beautiful ride @ceebs87BJ. Thanks for sharing.

 

[jhinnepal]

Here's my BJ70 with OME lift and 31x10.5x15 tires. Not the best picture, and I think 33s would fill out the wheel wells a lot better, but I like how the 31s drive. I was worried about anything larger and stock (3.7) gearing.
View attachment 2763133

Would love to see some more pics and angles if you have time. Really love that deep navy.

 

[Felde]

My BJ73 on the said tire and rim size and OME springs and lift. Regarding the optic, 33s would do better. But the 3B wouldn't do great on bigger tires...

 

[ceebs87BJ]

Would love to see some more pics and angles if you have time. Really love that deep navy.

Here's 2 more. The side view is loaded down with about 1000lbs of shingles. Really happy with the lift.

 

[jhinnepal]

Those are both great looking. Thank y’all for sharing. Anybody running them on a Lj78?

 

[coldtaco]

Here's my BJ70 with OME lift and 31x10.5x15 tires. Not the best picture, and I think 33s would fill out the wheel wells a lot better, but I like how the 31s drive. I was worried about anything larger and stock (3.7) gearing.
View attachment 2763133

I don’t think the BJ70 came factory with 3.7 diff ratio, should be 4:11

 

[ceebs87BJ]

I don’t think the BJ70 came factory with 3.7 diff ratio, should be 4:11

All of the Canadian BJ60's and BJ70's came with 3.7 gearing from the factory.

 

[coldtaco]

All of the Canadian BJ60's and BJ70's came with 3.7 gearing from the factory.

Interesting. I guess mine had the 4:11 because the previous owner had installed the cable locker axles

 

[JuanJ]

Hello,

Here is mine.

Juan

 

[aussie75series]

Mine has 32x11.5 which is close to the original split rim diameter size

 

[aussie75series]

With 2" lift and 3/4" shackle extension

 

[AirheadNut]

Here’s mine with 235/85R16 tires (about 32x9.5) and no lift. Will be installing a 2” lift within the next few weeks and will report back!