1HZ parts needed

[lynchmob]

Location

United States

Im looking for the following for a 1HZ from a HZJ79 .

Im sure the parts are somewhat universal for other 1HZ equiped cruisers.

A/C tensioner
PS pump reservior
Lower alternator bracket
Exhaust manifold shield

And an oil dipstick - there are three different 1HZ parts from toyota so I still need to figure out the year.

Thanks

 

[lynchmob]

Thanks Rick,

I got the main part of the ac bracket from g&s, but I need the tensioner.

Reservoir = $200 from ENS

No luck on the lower mount from g&s

Shield is $119 from ENS


Was looking for used sources for any of this stuff. Ill go to the dealer if I have to. I need to get EPC running first.

 

[kevinmrowland]

I am pretty sure that the AC tensioner is the same component as the 3FE one, I will check.

I also think that one of the either NA cruisers top alt bracket swaps over, I will look to see if it was a 60 or 62.


ENS helped me out with the year on my engine by looking at the serial number on the head.
They do not have an index, but they are able to chronologically place the number between other known engines.

Sheldon also helped narrow it down by the low oil sensor and the style of plug on the water temp sensor, but I think that was only for pre or post 95.

 

[exmodlad]

Thanks Rick,

I got the main part of the ac bracket from g&s, but I need the tensioner.

Reservoir = $200 from ENS

No luck on the lower mount from g&s

Shield is $119 from ENS


Was looking for used sources for any of this stuff. Ill go to the dealer if I have to. I need to get EPC running first.

if the reservoir looks like this Chris i have one

Best Regards

Gord

 

[Japan4X4]

Doodlly dooo.....

I was just looking, not doing anything else.....

 

[lynchmob]

What gives rick? I could have used those part numbers.... I didnt copy them from your post. I mentioned the prices from ENS because a standard response I get is "check with ens"

Thanks gord. 1HZ is different. I could probably adapt something with a remote res from the junkyard or from a 70 series, but I would try to work with the one I have before doing that.

Japan4x - I emailed you