Installing GTurbo on my new 93 HDJ81, stripped the bolt on the supporting bracket. I know it's 17mm and I can not find any measurements or help trying to identify the bolt size to get a new one.
1HDT Turbo Mounting Bracket Bolt Size
- Thread starter TheHebrewHammer
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
It's one of these, same one that holds the bracket to the engine. Going off the sizes at home depot it seems close to a M12 with tighter threads.
ATL Cruiser
GOLD Star
All the turbo related bolts are in this guide. Step 18. This bolt is M10 x 1.25
' Safari Diesel Intercooled Turbocharger System for the Toyota Land Cruiser 1HZ diesel engine - http://www.safarisnorkel.com/turbo/guides/sthzj70n/sthzj70n_guide.html
Here's what it looks like on mine (please don't hate on the non-Toyota / non-JIS bolts). Mine might have been an M12 in retrospect.
I'd recommend grabbing a thread gage and a caliper for future reference. Both are SO cheap these days.
Amazon product ASIN B071H8GP18
Amazon product ASIN B000GSLKIW
' Safari Diesel Intercooled Turbocharger System for the Toyota Land Cruiser 1HZ diesel engine - http://www.safarisnorkel.com/turbo/guides/sthzj70n/sthzj70n_guide.html
Here's what it looks like on mine (please don't hate on the non-Toyota / non-JIS bolts). Mine might have been an M12 in retrospect.
I'd recommend grabbing a thread gage and a caliper for future reference. Both are SO cheap these days.
Amazon product ASIN B071H8GP18
Amazon product ASIN B000GSLKIW
mudgudgeon
Resident galah
Toyota uses JIS fasteners.
12mm JIS bolt will generally be 1.25mm thread pitch.
12mm JIS bolt will generally be 1.25mm thread pitch.
- Thread starter
- #5
They were M12 1.25, I took the bolt I had to Ace Hardware and they had like 6 different options. Thank God for Ace Hardware.
