1993 FZJ80 4.5ltr Engine 174,xxx Miles

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 29, 2012
Threads
0
Messages
894
Location
Portland, OR
Website
www.duiser.com
Location
United States
I have a 1993 FZJ80 4.5 Ltr Engine with 174,xxx miles. I removed the engine from the truck due to a bad #3 rod bearing. Crankshaft can be re manufactured but needs new #3 rod. Otherwise the head/ pistons look good and has been looked over/ cleaned by the machine shop. All you will need is new rod bearings, gaskets and piston rings.

I no longer need the engine as I have decided to put a cummins diesel motor in the truck.

I can accept credit card/ paypal.

$800.00 OBO.
 
Its the ENTIRE 4.5L 1FZ-FE engine out of a 1993 FZJ80. Minus the vehicle ECU.

If you wanted the ECU I could include that at a later date. But, the project is currently on hold.

So are the electical components included? Throttle body, manifolds, etcetera, etcetera or is this just a long block?
 
ECU is different for 94 but I could use all the other stuff to rebuild it in my garage and still be able to use the current motor I have.

I'll let you know because I am still poking mine to see if it is dead enough to skin.


Andrew
 
I think its the same, 93 and 94 both have the flapper style MAF.

ECU is different for 94 but I could use all the other stuff to rebuild it in my garage and still be able to use the current motor I have.

I'll let you know because I am still poking mine to see if it is dead enough to skin.


Andrew
 
Back
Top Bottom