1987 Tan fj60, parts and pieces/what you need?

[Todo]

Like the title says I have a Tan 1987 fj60, and I think the time has come to share my parts rig with you all (for a fee of course ). It is missing the following parts so far...
-tranny
-front grille
-and possibly the doors
*note = engine has blown head gasket

*front dash pad is cracked
*all 4 doors are not up for grabs (keeping for a separate project)

Besides that most of it is up for grabs for the right price.

Both myself and the rig are located in Sumner Washington (98390). Pictures are available upon request.

Depending on how big the part is will depend on whether or not I will be willing to ship it.

Thanks for looking and have a great weekend. fyi - you will be supporting my "upgrade the 80" fund.

 

[Pinion]

I'd like the distributor lifter cover and ignitor.

 

[IH8Wood]

How much for the front locking hubs?

 

[ginericLC]

Passenger side seat bottom. I only need the bottom and that makes shipping so much easier.

 

[ksollinger]

How about the rear tail gate? Rust? Pics? I live in seattle so no shipping is needed.
Thanks
kelly

 

[Dirtsquirt]

power steering box.

How much?

 

[Todo]

Looks like there's a lot of us who didn't get to go anywhere for the holiday weekend. o well. so, on with the replies! if I miss any of you sorry, just keep bugging me till you here back from me....

Pinion - distributor lifter cover and ignitor? your going to have to give me a little more help as to what it is you want. I guess you can say that I'm a rookie for a reason.

IH8Wood - I'm not ready to start pulling parts off of the axles just yet. If i do start pulling the axle apart do you care if the hubs are asian or warn? I think I have both, do you want pairs or a single?

ginericLC - do you care what pattern is on the fabric? I have 2 sets. I'll try and get pictures tomorrow.

ksollinger - rear tailgate is in not such good shape. I will post pics for that tomorrow too. you won't be very thrilled.

Dirtsquirt - the power steering system is leaky on both my 60's. I can try and check to see if the box it's self is any good.

I "get" to work on the yard tomorrow, but i will try to make sure that I spend some time playing with the 60, taking and posting pics.

thanks for the interest.

 

[made4surf]

How much for the radiator fan with clutch?

 

[In2cruisers]

receiver hitch?

 

[VETTE60]

Front side marker lights. both left and right. please

 

[dshock]

I need the center dash bezel - the part that is about 20" x 10" and surrounds the heater controls.

I need it in Tan and it needs to be in good condition with no cracks.

Regards,
Dan

 

[Pinion]

Hey, sent you a PM just now.

 

[Spike Strip]

Emissions Control Box and Fan control Relay ... And how's the Air Injection Rail ?

 

[CMD82]

Front bumper? Would you be willing to ship it to 23237?

 

[Todo]

made4surf - radiator fan with clutch is available, your the one that wants it, it's an easy part to pull and so so to pack. pm me and let me know how much you wanna pay and I'll see if I can make it work. sound like a plan?

In2cruisers - receiver hitch? yes, it has one and yes you can have it. how much you wanna pay for it? I will try and check it out tomorrow and see what kind it is/how heavy duty it is.

VETTE60 - markers? i can probably pull that off. let me double check and make sure that I don't need any of them for myself and I'll let ya know this weekend

dshock - center dash bezel is a no go dude. it is a piece of crap - sorry.

Pinion - I got your pm but haven't had time to look at how much the parts that you want are "worth" yet. hopefully friday I'll have some time.

Spike Strip - Emissions Control Box/Fan control Relay/Air Injection Rail. I will check and see how it looks. the rig is almost totally stock so it has all the misc parts and pieces, just don't know of the top of my head the condition of it all. I do have to check and make sure that my buddy doesn't want the air rail. he had talked about pulling it last time he was over but we never got around to it.

CMD82 - front bumper is available, it is not perfect but looks decent. I will get some pictures this weekend for you. and sure I'll ship it any where you want as long as you pick up the cost. it looks like it'll cost you 41 dollars (min) in shipping alone.

 

[Todo]

ginericLC - your fabric pics, I will try and get actual seat pics this weekend during the day time.

ksollinger - also, your tail gate pics. let me know what you think... i don't know if you want the upper half or the lower, the lower isn't in too bad of shape but its not perfect that's for sure.

 

[Spike Strip]

OK -- Lemme know when you find out.

S.

 

[lefthandblack]

PM sent

 

[frontrange]

Column and other steering parts

How about the steering column (no wheel) intermediate shaft, drag link and relay rod??

TIA

 

[Pinion]

I was going to offer you $120 shipped. I didnt want to be rude.