Well, this is how she sits right now:
Replaced the timing belt
Welded some sheet metal in where rust used to be
Cut the bed off clean
Replaced the rear axles and 3rd
Put in new brake lines in back
Put in new fuel line in back
Replaced Air Filter
Oil Change
Adjusted timing
New poly windshield
new rear view mirror
Fixed the window track on the drivers side
Two ftermarket front fenders (little beat up but rust free)
3" shackle life w/spare set of brand new shackles
Things that are new/not installed yet:
ebrake cable
cam seals
valve cover seal
water pump/seal
Other things I have laying around:
spare rear axle housing
old fenders, rusty, but not as bad as some
two tailgates, one decent, one bent
rear bumper with lights (1 lense broken)
front bumper
stock top bow thing(good shape)
stock rollbar
3 soft tops in various degrees of being together
nearly brand new Drawtight towbar
spare axles in back with drums
Complete rear bed, rusty, that's why i cut it off
4 nearly brand new tires, 4 used tires with wheels, 1 spare BFG AT on a wheel (all wheels are stock)
Hyundai Pony Carb, never installed, with manual choke and cable (bought from a member here)
She starts, drives, stops, wheels and does everything fine. Small exhaust leak right before the cat, a piece of flex tube should take care of it. The lights/blinkers in the front work fine, no lights other than license plate lights in back since I removed them with the rear bumper.
SOOOOOOO
Long story short: All it needs to be road worthy are bumpers, rear light and a couple fenders in the back to have a driveable off-road worthy sammy.
I will consider parting out the extra's like the Drawtight, etc. Make offers.
Located in Westminster MA. Can deliver a reasonable distance for some extra $$.
$600 cash
Comes with notarized proof of registration in RI, good for a title in MA.
Pics are located here:
http://www.tacomaterritory.com/forum/showthread.php?p=444889#post444889
Replaced the timing belt
Welded some sheet metal in where rust used to be
Cut the bed off clean
Replaced the rear axles and 3rd
Put in new brake lines in back
Put in new fuel line in back
Replaced Air Filter
Oil Change
Adjusted timing
New poly windshield
new rear view mirror
Fixed the window track on the drivers side
Two ftermarket front fenders (little beat up but rust free)
3" shackle life w/spare set of brand new shackles
Things that are new/not installed yet:
ebrake cable
cam seals
valve cover seal
water pump/seal
Other things I have laying around:
spare rear axle housing
old fenders, rusty, but not as bad as some
two tailgates, one decent, one bent
rear bumper with lights (1 lense broken)
front bumper
stock top bow thing(good shape)
stock rollbar
3 soft tops in various degrees of being together
nearly brand new Drawtight towbar
spare axles in back with drums
Complete rear bed, rusty, that's why i cut it off
4 nearly brand new tires, 4 used tires with wheels, 1 spare BFG AT on a wheel (all wheels are stock)
Hyundai Pony Carb, never installed, with manual choke and cable (bought from a member here)
She starts, drives, stops, wheels and does everything fine. Small exhaust leak right before the cat, a piece of flex tube should take care of it. The lights/blinkers in the front work fine, no lights other than license plate lights in back since I removed them with the rear bumper.
SOOOOOOO
Long story short: All it needs to be road worthy are bumpers, rear light and a couple fenders in the back to have a driveable off-road worthy sammy.
I will consider parting out the extra's like the Drawtight, etc. Make offers.
Located in Westminster MA. Can deliver a reasonable distance for some extra $$.
$600 cash
Comes with notarized proof of registration in RI, good for a title in MA.
Pics are located here:
http://www.tacomaterritory.com/forum/showthread.php?p=444889#post444889
