Parting Out 1986 fj60 good engine and tranny

[Randyfj60]

Has gray and black pin strip interior. Body is pretty rust all glass is good motor and tranny and axles and all lights are there hatch and tail gate are in good condition. Get in contact if you need something and I'll take a look.
Sold: front window, fenders,

 

[LakeNorman_FJ40]

Location please

 

[LAMBCRUSHER]

what color is the tailgate? dibs if red, please...also, do you have the spare tire tools or ANY of the OEM tools? Dibs on those, please, if you do. TY

 

[Randyfj60]

what color is the tailgate? dibs if red, please...also, do you have the spare tire tools or ANY of the OEM tools? Dibs on those, please, if you do. TY

I do have the tool kit and the tail gate is not red it is gray. And the location is Columbus ohio

 

[LAMBCRUSHER]

Price and pic of tool kit, please? TY- I'll pass on the TG, tho...Thankx again.

 

[In2cruisers]

price on overhead light w/4" of wire pigtail?

 

[helimech]

how does the toyota emblem on the tailgate look, interested in that. shipped to 99021
also did you have rear shoulder seat belts?
any ac parts? looking for the condenser also

 

[gilamonster]

I could use the rubber weather striping or rubber/chrome piece combo from the outside of the front passenger door.

 

[nonamemtbr]

Looking for all the parts to do a auto to manual swap. Bell housing,clutch,flywheel,shifter,driveshafts,floor cover,boots,peddle bucket,cross member,mount,clutch master,slave and lines and all the bolts. Also looking for the front carpet if in cleanable usable condition.

 

[sfd60]

Looking for an egr valve if your going to separate.

 

[acerock]

Do you have the driver door window regulator? cost and shipping to 89523. Thanks!

 

[Randyfj60]

price on overhead light w/4" of wire pigtail?

10$

 

[Randyfj60]

how does the toyota emblem on the tailgate look, interested in that. shipped to 99021
also did you have rear shoulder seat belts?
any ac parts? looking for the condenser also

I have rear shoulder belts but no tail gate emblem. And also have all the ac component's condenser's fins are rough but the rest is good.

 

[Randyfj60]

Looking for all the parts to do a auto to manual swap. Bell housing,clutch,flywheel,shifter,driveshafts,floor cover,boots,peddle bucket,cross member,mount,clutch master,slave and lines and all the bolts. Also looking for the front carpet if in cleanable usable condition.

I have all the stuff to do the manuAL swap minus the clutch master cyclender. And front carpet is usable. Reply to 6142961608 and we will talk more

 

[Randyfj60]

Do you have the driver door window regulator? cost and shipping to 89523. Thanks!

No bearing is bad sorry.

 

[Randyfj60]

Looking for an egr valve if your going to separate.

WillING to separate make an offer on just the valve.

 

[helimech]

I have rear shoulder belts but no tail gate emblem. And also have all the ac component's condenser's fins are rough but the rest is good.

Is there some interior trim pieces for the rear shoulder belts? Could u send some photos? I would be interested in the shoulder belts and buckle. Also any trim

 

[In2cruisers]

10$

If good condition and have the pigtail.....

I'm in ....shipping to Sandy Eggroll. 92102

 

[In2cruisers]

Also...ebrake boot any good? Color?

 

[Ward]

Do you have a the "dash pocket" insert? (rectangular black plastic insert that is to the right of heater controls) Also looking for rear glass wiper and rear lift glass latch assm.
Thanks.