SOLD 1983 Carburetor (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

devo

SILVER Star
Joined
Nov 3, 2002
Threads
323
Messages
2,968
Location
Ogaa Po Ogeh - occupied Tewa territory
Location
United States
Found this one on the shelf where it ha s been for a long time. I’m sure it came off of a running FJ60 before being shelved?

Good for parts or rebuilding. DOES NOT have the primary or secondary jets.

~~~~~ $75.00 ~~~~~ Plus shipping


let me know,





devo

B326001D-5CBE-4813-B294-FA861BF11097.jpeg


989A8AF8-3A5B-41A4-A42A-461740538758.jpeg


CF7D99F1-4605-4E7B-A1CB-CA5B97EDD9C9.jpeg


704EC62B-C00D-43D4-8F6A-D64A6399008F.jpeg


01C4894C-C133-4836-B41E-2C942F8B2C69.jpeg
 
I’ll take it Bob.
 
Shop address, linked in my signature line. ;)
 
Day ran away with me Bob. I had to work remotely, putting a rebuilt trans and transfer back together to be installed in a local shop. I don’t do the heavy lifting anymore.

We’ll talk Monday.
 
Didn’t think to ask you to check it first; both throttle shafts are frozen. :(
 
Sorry man! True I never checked. I only knew that it was sitting on a junkyard shelf for a very long time and that it didn’t have the primary jets.
Hopefully as a carburetor core it will be useful to you?

Will you be able to free up the throttle shafts?






devo
 
Last edited:
Sorry man! True I never checked. I only knew that was sitting on a junkyard shelf for a very long time and that it didn’t have the primary jets.
Hopefully as a carburetor core it will be useful to you?

Will you be able to free up the throttle shafts?

Probably. So many carbs on deck for rebuilding right now that I m not sure exactly when I will get to find out.





devo

Probably. So many carbs on deck for rebuilding right now that I m not sure exactly when I will get to find out.
 
I am sorry this happened, and after selling lots and lots of used parts this is a lesson learned for me. From here on out I will need to check these ancient used parts a little more thoroughly .

Well, I guess you could spray it down, heavily, with a penetrating oil so it will be ready when you are?




devo
Sorry man! True I never checked. I only knew that was sitting on a junkyard shelf for a very long time and that it didn’t have the primary jets.
Hopefully as a carburetor core it will be useful to you?

Will you be able to free up the throttle shafts?






devo
 
91C0D444-158D-4445-8D9A-F30C7EDEF684.jpeg
D178EF92-6CFE-4EC5-868D-14F68E5B46B0.jpeg
 
Last edited:

Users who are viewing this thread

Back
Top Bottom