1975 FJ40: Parting out in DC Area

[MDVADCFJ40]

Location

United States

Parting out 75 FJ40. I have most of the truck minus the tub, hard top and engine. Front clip, side and back doors in great shape. I am in Rockville.

 

[cruiserhead]

Do you have pics of the front clip and how much?Send them to fj40s@optonline.net
Thanks,David

 

[66LWB45]

you have a pm on front seats & all 4 doors

 

[77TLCFJ40]

PM sent on Windshield frame.

Thanks

 

[MDVADCFJ40]

I have the VIN and title for the truck

no seats but all four doors are in good shape

$750 for the front clip with fenders, grill, bib aprons and hood all sand blasted and primed. Also have windshield but it has not been cleaned up.

$200 each for the front doors and $150 each for the ambulance doors.

 

[77TLCFJ40]

Don't need windshield frame cleaned up other than removing broken glass to save shipping weight.

Any rust??

PM me a price.

Thanks

 

[mikesc]

Upper Dash Pad

Do you have the upper dash pad? If so what kind of shape is it in?

Mike

 

[Willard]

I know the engine is gone, bit do you have the Transfercase, Transmision (4 speed) or Axles complete?

Thanks

 

[AlaskanHerbs]

looking for both front turn signals and door mirrors.
pics and prices if ya have em please.

 

[MDVADCFJ40]

Yes, i have the full drive system, axles, 4 speed, transfer case, drive shafts. Also the bell housing for a conversion to a chevy engine. Engine mounts have been re-welded on the frame.

 

[Willard]

Pm Sent

 

[dukebluerog]

looking for rear disc brake parts (rotors, calipers, brackets)...

 

[toomanytoyzz]

sent you a PM regarding the ambulance doors. Please send pics to eatpoo2@comcast.net

 

[Pinion]

If you have the tire carrier and its hardware, Im interested.

 

[MDVADCFJ40]

yes, have the tire carrier. $75?

 

[77TLCFJ40]

How about the windshield frame?!?!?!?!?!?!?!?!?!?!?!?

Please see previous posts and feel free to respond.

Thanks

 

[Pinion]

What shape is the carrier in? Do you have the clip and bumpers? This is for the driver's side, correct?

 

[ginsudan]

Fan Shroud

Looking to buy a 2F fan shroud that is has a an approximately 19 inch diameter hole for fan blade. Is identifiable by three bolt holes on passenger side and four bolt holes on drivers side. And is 3 inches in depth.

 

[In2cruisers]

Complete harness??

 

[toomanytoyzz]

you guys realize this thread was started in '08 right??