For Sale 1970/77 Part out. (2f/4speed)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 23, 2011
Threads
90
Messages
756
Location
Atlanta, GA
Location
United States
1977 and 1970 FJ40 Parts
Kennesaw, Georgia
I have a ton of stuff pilled up from my ongoing project. I am only listing a few things for sale as I still need to go threw alot and sort out what I my self need and what I dont. If you see something your interested that isnt listed in the ‘Im keeping this’ list then feel free to ask about it. All prices are Best offer. I would keep everything specificly the frame and bits but I am restoring a 77 and do not have the time to do two or sit on two. If this doesn't sell in the next 4-6 months then I will more than likely take it down and rebuild it all into something for off road.

I have a 1970 rolling frame. It has been lined with a bed liner and under it the frame is in really good shape. The drive shafts are pulled due to the new installment of the 2f and 4 speed, more on those later. I am keeping the 35 inch KM1’s but installing some brand new 31 inch Mudstar Radials M/T. I am also pulling the leaf packs from it to put on my other cruiser but I have two other stock packs to choose from. The frame also has the front shackle reversal. The hubs lock up and seem to have little/no leaks, either that or theres no fluid in them. I bought this about 2 weeks ago and have buried my self in parts so I haven't had time to give everything a once over.
Mounted on the frame is a 2f that came out of a 1987 FJ55. It has one broken head bolt but nothing a machine shop cant get out. The PO said it ran prior to the head being removed but I have no way to guarantee that. Also with it is the 4 speed and T case. They seem to be fine but like the 2f I never saw them run or drove em so I cant say anything for sure. Make me an offer, I wont part any of the above out unless there is a buyer at the same time for the rest.

The tub is off my 1977, it needs alot of work. Needs, sill, lower QP patches, floor board and then some smaller issues all around. The cowl is in good shape. $300.

Now here’s the ‘Im keeping list’:
-Shocks
-Stock carburetor
-Fenders (but not the side light hook skirts)
-Headers
-Metal gas tank
-Wiring harness’s
-Tire carrier
-Rear hatch
-Rear heater
-Front seats
-Radiator and frame

I will up date this add after I go threw everything and sort it all out so I can have pictures of just what is for sale. I would be willing to make a deal to some one who buys in bulk. I also would prefer to not sell the tub or rolling frame separate, but if one had to go on its own I would much rather sell the tub and try and hang on to the frame aslong as I can.

Pictures:
http://photobucket.com/ChandlersFj40sale

Contact information:
Cell: 4O4 66I 9IOO (I prefer text’s because I might be in class but time to call, 3:00-9ish EST)
Email: Chandlergraham1@mac.com

No trades but if I had to I would take ammo.
 
Last edited:
I'm looking for windshield knobs, Hood, seat brackets, upper dash pad, and 3 point seatbelts. Pm if you have some or all your willing to part with.
 
I have that split hood with the chrome piece in decent condition, and a upper dash pad that is cracked up but nothing a recover/cap or just filling them wont fix. I will have more detailed pictures this week end.
 
New pictures have been taken. Everything in them is now for sale. I will then make a new post with prices for everything(still have some research todo). Untill then feel free to toss numbers at me!
 
Trunkmonkey,

I'm looking for a thermostat housing (upper and lower) for my '77 40. Any chance you've got one there?

Thanks!
 
Last time I checked I have a few. I will check when I get in the shop tomorrow and let you know.
 
Dean, I will measure the ones I have tomorrow as well.


Flyguy, I do not know if I have a '70 specific but I do have a few set ups. I will look but I would prefer to sell the whole assembly as well, not just the switch.
 
got a pair or right side rear lift gate stay?
DSCN1581.webp
 
Back
Top Bottom