Anyone have one lying around? Full part # is 31204-60080; discontinued, so no option to buy new that I know of.
Wanted 13BT Clutch fork Part #60080-2
- Thread starter Aaroneous
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Sep 28, 2002
- Threads
- 558
- Messages
- 8,122
- Location
- Kamloops, BC Canada
- Website
- www.shopraddcruisers.ca
Like this? If you give me some measurements, I can make sure it's correct. This part was not labeled from where it came... could be BJ74, or HJ61
- Thread starter
- #3
That could be it... I don't know what the measurements would be because the one I have is the wrong one. That looks darn close, though. I'm sure you checked already, but does it have the part number stamped on the other side like this one? This one says 60080-2, picture from another forum member.
- Joined
- Sep 28, 2002
- Threads
- 558
- Messages
- 8,122
- Location
- Kamloops, BC Canada
- Website
- www.shopraddcruisers.ca
Ok, this one has 60070-3 and it looks a little different than the one you have there now that I'm seeing the new angle.
I'll see if I have others that might be correct.
I'll see if I have others that might be correct.
- Thread starter
- #5
bump... anyone have anything?
- Thread starter
- #6
bump
Still looking? I've got a bin full of this kind of stuff
Can you pick it out of a lineup?
- Thread starter
- #9
Haha, I should scan parts wanted ads more often obviously. PM repliedDon't tease me - I've been looking for this for almost 6 months now! PM sent
- Thread starter
- #11
Got it, and it is a perfect fit! Thank you, 70sguy!
Glad I could help.
Hey mate, any chance you still have these forks? Mine snapped and my car is useless without it. Chasing it for a bj73 as well.
Hi, do you happen to have another piece of this fork, part number 31204-60080, same as what was on your photos, please help.
The only fork I have left is the one on the left with the little tab hanging down, I suspect it’s off pre 84/10 production BJ60
Hi, the one on the left I think is for 40 series. The other four on the right side are for the 70 series. Hope you can find one like that, thank you.
Pre 84/10 production BJ60 and BJ42 use the same motor, Bellhousing, clutch etc.
I sold all the later B series clutch forks.
I sold all the later B series clutch forks.
