1-1.25 Inch Droop after TJM bumper install

[pdxlc200]

Hey guys, I'm running a OME setup that includes:

722 Rear Coil Springs + Nitrocharger Sport 60029 Rear Shocks
702 Front Springs + Nitrocharger Sport 90005 Front Struts

So here's my question. Should I upgrade to 703 Front Springs or simply add the 10MM spacers to the existing 702 Front Springs?

My front end has drooped more than 10MM (0.393701 inches) after the TJM bumper install... but I'm concerned that the 703 Front Springs might be too jarring of a ride. Not sure yet about adding a winch, otherwise I would just do the 703s.

Thanks for the input!

 

[HDJ100L]

Determine what you will install in the future to prevent buying wrong spring. Every spring has it weight to carry and it is the best to use the proper spring rate from OME. You save time and money as well.

 

[MutleyFJ62]

Thats pretty normal, you'll get another 5mm drop with the weight of the winch in the bar as well. I used to see about a 15mm drop with steel bar and 9500lbs winch install.

 

[pdxlc200]

Mark at MetalTech talked me into the Radflo 2.5 coil-overs, so I should be all set. Thanks for the tips!

 

[Billfish]

A great choice I'd say. looking forward to reading your impressions post fitment as compared with OME.