timing

Struggling to find a FSM for a FZJ105 4.5L I6 gasoline without distributor. I think I have a timing issue and my mechanic has been unable to solve it. All I can find are manuals for the V8 100 series or the I6 80 series with distributor. Following a head gasket install, I am overheating and...

HELP! I have a 1985 22r. I was driving down the trail, and all of a sudden lost all power, the truck completely shut down. I put it on the flatbed and took it home. I looked at the distributor and the rotor was destroyed and parts were melted to the cap! I've never seen this before. I cleaned...

I have an US spec 1985 FJ60 with all the original equipment, smog etc... I had done everything I could to tune it up and was still not satisfied with its performance. Then I ran into an engine builder who had been a certified Toyota mechanic back in the day and he recommended I set the timing...

Hi guys, I just had a bad experience and I hope someone can help me with this. I just took the car to a shop to adjust/repair the fuel pump for my HDJ80 (1HD-T) and had a very bad experience... I´ll start since the beginning, 1 year ago the car was burning eyes, too much diesel was being burn...

So, my injector pump was apparently in need of a rebuild so instead sourced an allegedly working pump from Canada. My mechanic (not a diesel expert) said he could put it in and he did. It is smoking a ton and is not running well. He claims the pump is bad but I have reason to believe that it...

Longshot: Anybody have a 2F timing cover gasket laying around? I ordered one Monday but it won't be here for the weekend and was hoping to finish off a project. Would need to be triangle area. :beer: Ramon

I posted this in my 1966 FJ40 Frame-Off Build (3rd Generation Owner) build also, but thought I'd start a new thread separatly. So @Rock40 and I need some tech assistance here on a sealing washer question. #92 on SOR diagram (below) is a lower bolt on the timing cover area that goes directly into...

I recently replaced a leaking VCV near the distributor on my 1980 FJ40. The leak went away and the idle quality is better but the engine is running a little like the timing is off. I wonder what the suggested ignition timing is for a stock 2F running on modern 87 grade (10% ethanol) fuel and...

SOLD TO ANOTHER MUDDER. THIS VEHICLE IS NOW SOLD AND NO LONGER AVAILABLE. (when I refer to "minor scratches" you can see the largest one in this pic, on the corner of the front bumper, driver-side corner. That black mark is a small scratch, which I will fill with matched touch-up...

Searching for a good condition Timing gear cover and backing plate and oil squirt-er from a late 2F years 85-87 out of a FJ60. Also need thrust plate and bolts, and possibly more if you're parting one ... Anyone parting out a late 2F ? Thanks. :)

Three pics here, showing a little cracking in the timing belt. Is there some life left here? Or time to change?

I bought this kit thinking I'd need it but it turned out that my machinist had order these parts when they did the valves. So here is a unused LCE Timing Chain Kit for a 1FZ-FE Details here: 1FZ-FE 4.5L i6 Timing Chain Kit 1993-1997 Land Cruiser $80 shipped (list is just under 100 + 20 bucks...

Looking at an lx470 tonight. The flipper swears that the auction he bought it from stated that it was done at 150k miles (12k ago) and i dont see it coming up on the lexus history. I am going to call the toyota dealership associated with that dealer group but I am not optimistic. Im hoping...

Ive decided it's time to replace my timing belt and all that gets done at the same time. I was "inspired" by a small trickle of Coolant coming from under the timing belt case, I assume from the water pump. Can anyone point me to a well done guide to doing to repair? A video would be awesome...

Hey guys, I've started to change the timing belt on my 2000 LC myself this week and am running into a few issues with it, so I'm wondering if there are any others on here that have done this job that can give me some advice? I've done a few T-belts on various cars but this is the first time on...

I seem to have lost the door to my timing window (pic below). Is this a big deal? If so, any idea where I can find one? Thanks!

Apparently, the previous owners *never* changed the timing belt... *sigh*. While changing the Tensioner and Idler, I was disappointed to see this. I figured they HAD to do it at least once, though there was no sticker under the hood. I don't even want to crank it till I get this fixed (along...

About to purchase a 2006 LC, timing belt service is listed on Toyota owner site from the dealer. Should I ask my local dealer to pull the full repair order to make sure water pump was replaced? Or can I visually inspect the pump easily to tell age?

Hi everyone, I had an oil leak at the front of the engine and I decided to change the crankcase pulley oil seal and oil pump cover o ring. See my crankcase pulley below, what do you guys make out of it? Can I still reuse it? The rubbery is pretty worn out. I also noticed a crack in the...

Is It safe to assume that by aligning the timing marks the engine is at TDC too? Cheers from Ecuador and thanks for all your help