suspension

My 80 has brand new OEM shocks and front springs. The hangers for the exhaust have been checked and are fine. Yet, there is still a squeaking that comes from underneath that sounds like metal on metal - i can't tell which side it's on and I know it's an old truck and will never be quiet, but...

First off, here are the suspension and tire specs: SPC Upper control arms. BP51 with 2 inch lift, tires 285/70R18 Symptoms: Recently steering wheel points slightly right but truck seems to track straight. Truck has roughly 20k miles as do the ridge grapplers. It’s primarily used for...

Suspension is blown on my stock 2005 non-KDSS GX470. I have researched and read through the forum posts until I am blue in the face. I am sure there is a thread that discusses this, but I have tried to search and cannot find what I am looking for. I have spoken to multiple places on the net...

Hi. I have a 98 LC. For 5 years no mechanic has said anything about my control arms and now one is saying that mine are not ok (maybe unsafe) and look unusual and aftermarket. Recently I'm hearing noise in my steering when turning tighter in a parking lot etc. Do these look ok to you? Pics of...

Sold my 2006 LC100 and I've got some spare parts for sale Front AHC lines (used, sourced from southern states) - $160 each + shipping Rear AHC lines (New Toyota parts) - $180 each + shipping Rear AHC globes (New Toyota/Lexus parts) - $325 + shipping Used (10k -ish miles, bought on ih8mud)...

What would this part of the front axle connecting the axle and frame be called and why would it be there? Bought this truck with the lift and suspension set up the way it is and was under there looking everything over and noticed a crack in the bracket attaching it to the frame. Not sure why...

Sold my Tacoma and have no need for these parts. All new OEM parts, discounted ~40-50% off MSRP. Local pickup only. 43512-04041 Front Rotor (qty 4) MSRP $81.82/ea 04465-04080 Front Pads (qty 1) MSRP 115.02 04945-0C030 Front Pad Shim Kit (qty 1) MSRP $26.61 $200/all...

Hello everyone! Thank you for taking time for me today. I recently purchased, from the original owner, a 1999 100 series with 150,000 miles. It's all original condition. I'd like to raise the front suspension and install oversized tires and wheels (currently 275/60R16). Not wanting to make this...

Front and rear FZJ80 axles. Swapped elocker diffs to my 80. The front was disassembled as I was going to convert the housing but ended up cleaning up the elocker housing instead. The rear axle is a bit rusty and is the elocker housing so has the cutout for the locker motor. Front axle and both...

Hello, Dummy question, but just want to make sure before moving on. I'm ripping out the rear AHC shocks on my 2000 LX470 and on one side this part came off: But on the other side it stayed attached to the frame: To be clear this on the underside of the shock mount. The lower of the two top...

I am looking to refresh my sons 100 series LC with 285k miles, at least the front end. The OEM parts are really expensive, and if I have to go that route I will but with 2 kids in college it would be nice if I did not have to spend a small fortune. Are there any reputable aftermarket suppliers...

Partial? Axle rebuild kit from Cruiser Outfitters Also, unknown differential pieces but believed to be an auto locker. Not sure if it's front or rear, but probably rear. Please pay shipping if you want them.

New oem 80 series shocks, they where installed on the truck but maybe only driven a mile or two. 120.00 OBO Pick up in Port Republic MD or +shipping

My one-owner HJ61 from Spain is at the uphoulstery shop right now to have the seats sewn with a fun Scottish tartan wool. Then it heads on a ship for America! The suspension is, as far as I can tell, original and quite tired. With a new interior, fresh paint job, and full dealer mechanical...

Will my AHC system last longer if i do not use it often? For instance, i can decide to switch it off so that i only switch back on only if it is really necessary. Is this even a good idea?

Up for grabs is the major KDSS components from a MY17 200-series. -Front KDSS Piston ($400+shipping) -Rear KDSS Piston ($400+shipping) -Accumulator ($500+shipping) -Adapter Fitting ($100+shipping) -Front KDSS Arm ($400+shipping) Will sell the whole package for $1500+shipping. System was...

Hello all, I currently own a BJ42 that was built by Hilltop Cruisers here in AB, Canada. It currently has a spring over suspension setup running on 37s. I want to remove the spring over setup and need some guidance. Can someone point me in the right direction if there is a kit I can order, or...

I'm planning on putting FCP suspension on my 2017. I only want to lift it about an inch. I can use some Dobinson rear springs for 1" in the rear and wind the preload adjusters down on the front. My question is about the panhard bar ("stage 2"). I don't think I'll need the adjustability...

My 04 LX470 with AHC has this strange noise coming from the front drivers side suspension tower when going over speed bumps and pretty much anything that requires a decent amount suspension travel. Upper control arms have been replaced. Does anyone have an idea as to what this might be? Thanks!

Trying to dial in your rear suspension height after a change in setup? Adjust for weight on one side vs the other? I used the smaller ones to adjust for gas tank/rear tire carrier lean. The 30mm spacers are about 1 - 1.25" lift. I am selling a group of spacers that are just for you! 2x 30mm...