suspension

Hello all, I currently own a BJ42 that was built by Hilltop Cruisers here in AB, Canada. It currently has a spring over suspension setup running on 37s. I want to remove the spring over setup and need some guidance. Can someone point me in the right direction if there is a kit I can order, or...

I'm planning on putting FCP suspension on my 2017. I only want to lift it about an inch. I can use some Dobinson rear springs for 1" in the rear and wind the preload adjusters down on the front. My question is about the panhard bar ("stage 2"). I don't think I'll need the adjustability...

My 04 LX470 with AHC has this strange noise coming from the front drivers side suspension tower when going over speed bumps and pretty much anything that requires a decent amount suspension travel. Upper control arms have been replaced. Does anyone have an idea as to what this might be? Thanks!

Trying to dial in your rear suspension height after a change in setup? Adjust for weight on one side vs the other? I used the smaller ones to adjust for gas tank/rear tire carrier lean. The 30mm spacers are about 1 - 1.25" lift. I am selling a group of spacers that are just for you! 2x 30mm...

Anyone see the new ARB mid tier suspension? Looks very similar to the Bilstein 6112 series. Coming out with 4Runner kits, both regular and heavy load (probably would need the heavy load for GX460). https://arbusa.com/old-man-emu-4x4-suspension/mt64/

Two sets of gears and install kits. I bought these gears over 10 years ago to put in my '78 FJ40 and they have sat on a self in the garage ever since. Moving out of country and need to sell. $500 + ride New price : $400 + shipping

Up for sale is a set of Old Man Emu 2.5" Front/Rear coil springs for 1991-1997 80 series Toyota Land Cruiser. These are 2.5" Medium load springs. Part #s OME2851/OME2860 The front and rear springs are used and were purchased in 2019 and removed in December of 2022. $300.00 for the set of 4...

Muddrers! Up for sale is a set of Old Man Emu (OME) Nitrocharger Sport shocks Front and Rear for 1991-1997 80 series Toyota Land Cruiser. Part #s N60018-S, N60020-S These are in-fact used! Purchased in 2019. I cannot tell you the exact miles that these have seen (mi. not at the time of...

So I just had a new set of 17x8.5 +25mm Icon Thrusts installed along with 285/70r17 BFG KO2 Load Range C 113/116S tires. Currently I just have the 1” factory spacer/level for suspension work. I expected some rub, but before I went to molding/trimming I wanted to make sure this is t something I...

Just recently purchased my 1975 FJ40 and I've been troubleshooting some steering issues. She wanders and shimmies severely on rough roads. I've been reading about it and I'm thinking caster shims and new leaf spring bushings. Thoughts? The FJ has a SOA conversion on stock springs and inversion...

Pair of OME 2702 front springs. Nothing wrong with them. They have about 3500 miles of use. Great springs, just decided to go another route… $95

Front UCA's, all 4 shocks and cross member, all oem, shocks and ucas need bushings and upper ball joint, off 200k mile rig. Have oem rear springs too. 150 obo (willing to trade for other 100 series parts), if in denver ill deliver or we can setup neutral meeting spot

Is there any value to sell an OEM suspension with about 40k miles on it? I have no idea what these parts would be worth. Shocks, struts, springs, UCAs…

Current height with OME shock/spring height with no additional weight: Front - 22" center hub to fender Rear - 23 1/2" center hub to fender I want to move to a Dobinson IMS kit w/ C59-222V 2.0″ front and C59-223v 1.75″ rear. I want to also add a FR Slimline II rack. Best guess on height is...

After replacing my rear shocks with new iron man fcps my 03 lc is still riding like a safari mobile. Took it to a shop that deals in suspension and they reviewed all my componentry and as I suspected everything is good (not worn or broken). Where he did indicate something less than normal is is...

I have LC Amazon 2002 (Diesel). i have driven since 2018, and it is in very good condition. Have had no major issues other than maintenance. Recently replaced "shocks absorbers" and all four globes since it was driving harshly. Since 2018, graduation test slowly reduced from around ten to...

Putting BFG 33x10.5 on my 1985 60. Will a 2” Old Man Emu be enough or should I go 3”?

I’m so frustrated, swapped my old iron man foam cells out for foam cell pros cuz the back was hopping like a impala on switches especially on small road imperfections. New shocks didn’t fix it. What should I be looking at besides that. -Sway bar bushing only have 20k on em and mounts are good...

I have a nearly all-original 1979 FJ40 that I want to keep as close to OEM as possible. It still has the original shocks and springs. What shocks would you recommend if I want to keep it as close to OEM as possible? Also, should I rebuild or replace the springs? If I should rebuild the...

Looking for a skid plate for my 2012 Tundra rock warrior (not sure if it's different). Also looking for coilover medium springs with shocks assembled, Old Man Emu. Also looking for rock sliders (crewmax). I am located in SE WI. Also, a dirty deeds medium exhaust...rarely see these used but just...