power

I recently installed some awesome BMW 3 series powered seats in my FJ62. I rigged up a 555 timer as has been described here any other places to trick the computer in the seats into thinking they are connected to a BMW. (It’s really just an intermittent 5v pulse that keeps thr seat control from...

Seems like there's not much discussion on 1HZ power steering lines. Mine are leaking and causing other problems, and Amayama reported NLA from supplier. Anyone have a part number replacement for 44410-60280? Alternatives? Didn't think this would be an issue to find.

Would a leaky cap or leaking reservoir cause foam or frothy PS fluid? My PS whines like crazy n froths up, I replaced the cap, but I’m still getting some kind of leak from the reservoir, I put white tap around the upper o ring lip and doesn’t appear to be leaking from there, I think it might be...

I am hoping you 200 LC owners may have some thoughts on this issue i have with my 200 series 2008 landcruiser 4.5 L TD 350k on clock. when under load towing and generally when going up steep incline, foot flat on accelerator - car wont rev over 3000rpm. been to various mechanics inc Toyota...

Hey All, I know a lot of no start threads around here. I've done a ton of reading from these threads https://forum.ih8mud.com/threads/1993-fzj80-startup-problem.1215539/ https://forum.ih8mud.com/threads/starter-or-neutral-safety-switch.233993/ and even the rising Sun club forum FZJ80 starting...

Hey all, Looking for constant power somewhere within my '96 80 series-preferably in the rear. Basically, looking to wire up an aux map light in the cargo area and would love to be able to turn it on and off whether the truck is on or not. Thanks!

I'm thinking about power steps for my 80. The motorized ones that lower automatically with the doors. Either a complete running board style, or just a single step like this. Amp is one if the larger players, but does not list one by application for the FJ80. Which vehicle would be the...

I converted my 1982 to oem factory power steering . Missing heat shield and brackets.

I know, odd question. When I was doing my timing belt a few months back, my friend helping me said he would get rid of the hydro (??)and just make the PS a stand alone operation. Has anyone done this or know what he mean? I can't find him now or I'd ask him LOL I am getting ready to replace the...

My power steering recently stopped working. Was whining a bit a seemed to be leaking a bit from the pump. I replaced the pump and new lines. Now I can't get air out of the lines. Foam and still whines. I wondering if my rack is bad. I've checked for 2 days of running it and it has no leaks but...

My 09 LX570 has some tailgate closing issues. It comes about halfway down, but then bounces a bit and starts to beep, then opens back up. But occasionally it does work as advertised, and comes down as it should. I've lubed the hinges, greased the (accessible) gears by the lift arm, and have...

Anybody have any info on this. It says made for fj40 that "has" factory ps. I've heard since I have a manual steering gear box, I'll need to shorten steering wheel shaft to fit this. Any information appreciated.

Simple help, Does anyone feel a major power loss with their 12HT?. When going up hill, truck loves to bog down and need to shift from D to 3. I’ve replaced turbo, and now thinking of rebuilding transmission. Not sure if the this is normal. Also, does anyone know if the 60 series 12HT has a...

Hey guys, I've got an HD-FT non EGR. It has the stock exhaust system with the cannon end pipe. I couldn't stand it, so we cut it off and welded a 3 inch pipe on. Not sure, but it feels I lost a bit of power/performance. Anyone got same experience or got the knowledge to enlighten me? Before...

So I’ve seen a few threads on here regarding the above issue. Mine specifically: mirrors folding in, but not out, and now refuse to engage in locked position rendering the mirrors almost useless. That said, I’ve tried disconnecting and re-connecting the plug behind the switch. No joy. The...

Hey all, long time lurker, first time poster. I have a 1985 4Runner and have been having issues with it running a bit rough off and on for a bit now. I’m down here in Baja and don’t have a mechanic I trust and also appreciate doing as much as I can myself and enjoy learning, so trying my best...

hello, i recently noticed that there is an influx of Chinese made power steering boxes for the solid axle trucks and landcruisers. i was wondering if anyone has had any experience using them and if they have, are they really reliable or should we steer away from using them. these so called boxes...

none of the windows work. If the driver window motor is dead, will it stop all of the windows from working? We were able to run power to the rear window motors and they work when jumped, but the driver door does not.

I am looking for power steps/running board for my 74 fj40. Something when the doors open the steps comes out. Any suggestions for a vendor and any recommendations you might have. TIA.

This is a great mod if you’re running a bigger turbo, injectors or both! Same geometry as the ones we used to carry, but with some modifications to the molecular structure of the steel itself. They will be made from high carbon chromium stainless with optimum hardness after heat treat. Tested...