intake

  1. Kenneth Ferro

    Intake Manifold Coolant Leak issue

    Hey guys, 87' 22r intake manifold leaking coolant (slowly) seeping from lower section of manifold. It seems to be leaking from the gasket between manifold and plate below. What is the name of the plate it is leaking from so i can properly find the gasket needed? Also, what is a good website to...
  2. cruisermatt

    Wanted  3FE intake cooling fan sensor

    I looking for this bracket and sensor. I threw mine away a few years ago and want another.
  3. UGA2018

    Wanted  Air intake hose

    need one for a 86 FJ60 with original 2F engine. Any help is appreciated!
  4. LittleRedWgon

    Welder - machine shop in Phoenix

    Well, I am at that point that most of us have been....the good ol cracked intake manifold. I only had to pull off the carb and look at it... even as dirty as it was, it's pretty clear. Suspected that this might be one of the problems...along with bad gaskets, loose bolts, etc... Now I...
  5. IanB

    1HD-T intake gaskets...reusable?

    I've got some seepage coming from my crossover pipe to intake manifold gasket, and IM to head gaskets. I'd like to pull it all apart and clean it out, do these gaskets need to be replaced, or can the be cleaned and re-used?
  6. Output Shaft

    2F Intake "Gas Filter" vacuum fitting ???

    Is the "Gas Filter" vacuum fitting thingy (tri-pipe) that screws into the intake manifold a one way air fitting? Or can air flow through it in both directions?
  7. 76classic

    Original Intake and Exhaust Manifold

    Ok, hate to be needy here but here goes. i bought this 1976 40 because it was untouched original except original owner changed carb to holly and exhaust to header, deleting all smog. The good news is he gave me the original Aisin carb and everything else he had removed. I posted some pics. I...
  8. wngrog

    For Sale  Pre-79 intake hose horn

    This thing is rough but it can be blasted down or sanded. No holes. I paid $75 for one in similar condition from Cruiser parts. $40 shipped.
  9. wngrog

    For Sale  Sold

    Air Cleaner Intake Hose for '79 to '84 Land Cruiser FJ40 Bought. Didn't use. $50 plus ship.
  10. T

    lc100 & lx470 intake difference?

    I know this might sound like a pretty dumb question but i was searching for a cold air intake for my lx470 and none really popped up but when i put in the info for a 2000 lc100 with the same engine intakes popped up like it was candy so my question is is there a difference in the intake systems...
  11. Vavrinyuk

    HELP! Where is Intake Air Temperature Sensor on a 1994 FJ 80 Land Cruiser

    I keep getting a check engine light CODE 24 (Intake Air Temperature Sensor) after my car warms up to normal driving temp and driving a few miles. Can someone please help where I can find it to fix the issue. When light turns on the idle only goes up a little bit but other then that engine runs...
  12. stainless 40/45

    For Sale  1987 fj60 intake and exhaust

    exhaust has scale but no visible cracks Will separate Open to offers Thanks James
  13. voorland80

    Intake manifold EGR port

    Ok, straight from the dumbass files: Cleaning EGR & modulator lines, stuck a cheap paper clip into this port - and Dammm I think a piece broke off inside this small port (driver's side, intake manifold). Tried to find another paper clip like it to determine if size matched and if truly broke...
  14. guzzi

    Wanted  3FE Intake Complete FJ62

    I have a carbureted fj62 and I want to pass it to injection, I look for the complete efi system to do the conversion
  15. DARKNESS

    For Sale  [CO] Silicone Intake Elbows

    Bought these for my supercharger but wound up using the metal elbows instead. They're not good for the supercharger because the elbow collapses under idle, but maybe they'd be good for something else. I don't remember where I bought them from. $30 shipped. 2x90 deg 3"x3" elbows 90 deg 3"x3.5"...
  16. KYLandy

    Intake Air Filter (not the replaceable one)

    I read on here somewhere about the non-replaceable air filter in the intake air box and was wondering if it can be removed permanently. I'm not talking about the air filter element that you can replace I am talking about the one that is in the top section of the air filter box. Has anyone...
  17. Loober

    For Sale  Plazmaman 1HZ/1HDT intake adapter - $120

    Hello, I have this adapter for sale, bought it for an upcoming intercooler setup, but decided to go a different route. Bought this last month for 180 USD shipped, selling for 120 USD shipped, save yourself 60 bucks. Nick
  18. Solidrock171

    For Sale  2f Offenhauser 4 barrel intake manifold

    Bought for a project that didn't pan out. You'll need to get a new port gasket, but is otherwise in great condition. $200+shipping
  19. wngrog

    Wanted  79-84 2F air intake horn

    hey guys. I need this metal piece. Its going into my 40 with a 2F with FJ60 air intake. Bought the hose new from City Racer. Need the metal piece
  20. digitalbuck

    2LTE Air Intake Part Needed

    The rubber is rotted out and broken on my air intake hose. This is the piece that connects to the turbo intake, and has nipples on it for the crankcase breather, etc. It was held together with some electrical tape by the lovely previous owner, and that all came apart obviously. I can't seem to...
Back
Top Bottom