fj40

Alright winter is approaching and I really need to get coolant in my engine. I need advice on a few things on how yall would about dealing with them. My cooling system is original down to the original pump that still surprisingly still works and doesn't leak at all. The barring is shot and has...

=========== NOTE - These are not mine, contact the seller via the Craigslist Ad ================= https://eugene.craigslist.org/cto/d/cottage-grove-1970-fj40-toyota/7677332981.html If it's posted, it's available Has been in a barn since the mid 90's. The engine is a fresh built ( at the time...

I'm looking for a relatively rust free pair of barn doors to fit my 73 FJ 40. Anyone have a set they'd part with?

The sector shaft on my fj40 with factory power steering is rusty and leaking. Has anyone used a speedi sleeve for repair? Would it be worth the effort to chuck it up in a lathe and remove just a fraction of the shaft so the sleeve would be flush with the shaft?

Had this FJ40 for 13 years. Bought from a local seller that had purchased in Arizona and brought to San Diego. Have had it serviced at the Truck Shop (TLC specific mechanic) in SD the entire time. Have receipts for literally everything done. Smog exempt in CA. Chevy 350 SB engine - V8 - runs...

Factory AC System from 1979 FJ40 Landcruiser. Installed by CCOT during a previous restoration. I purchased the FJ40 and removed the AC to install Vintage Aire during recent restoration. It was not charged and I never tested it when I purchased. Includes inside blower unit, compressor...

=========== NOTE - These are not mine, contact the seller via the Craigslist Ad ================= 1971 Toyota fj40 landcruiser. Chevy 350 engine , turbo 350 automatic trans, 4 wheel disc brakes, ausi rear locker, 9000 lb winch, power steering tilt column, tow bar, run great pink in hand...

Does anyone have another supplier that sells the entire conversion kit to swap in an FJ60 power steering unit to an FJ40? Ive tried to get the kit from IRON PIG but they are no longer selling things. Ive got the gear box, and just need all the other parts. Id like to go the FJ60 route due to...

I wonderingwhich way the four bolts that hold the clutch fan and pulley onto water pump come off .clockwise or counterclockwise. I having huge problems getting these off and no trouble which any other on truck I post picture of the fan pitch as herd that makes differance

What have yall used to mount your stereos? This 40 has a tongue that juts out under the stereo. Thinking about using some thin strapping.

Hello friends, I’m working on fitting some aftermarket front fenders (unknown brand) and they’re lining up pretty well. The problem is there were no holes drilled for mounting whatsoever. I’m reaching out to see if someone could give me a measurement on how far out the fender should be from...

I having great problems removing the 4 bolts behind the fan assemby to get at water pump.Which way to remove bolts left to loosen? I not sure if matters which way pitch is on fan as the angle pitch faces drivers side but have great trouble to loosen!!!! I holding the pulley with a bar so will...

wanted fj40 door hinge , left or right it doesn't matter to me ( easy to press the pin out and flip the plate/pin ) early or late... i have 3 of each i just need 1 to complete the set

Looking at buying a 1982 FJ40. How do you tell if it’s an LX model? It has the zebra forward facing seats with brown interior. It has 2 windscreen wipers. It is a 4 speed. New to this. Thanks

Im looking at a 1969 fj 40 owner says its stock with 81,000 original miles... but it has a roll bar? i didnt think these came out till '72/73?? thoughts?

We have spent nearly 3 days trying to get the brakes on this FJ to work. 1. We rebuilt the master cylinder and could not get the brake system to build pressure. 2. After many hours rotating from wheel to wheel we realized that one of the drivers side wheel cylinders was leaking. 3. Got 4 new...

Hey all. Restoring a `66 FJ40, keeping this rig as was, minus necessary upgrades. Just noticed the water pump alignment is off after putting on new belt. The alt. and crank are aligned, albeit the alt. bracket is either backwards or something, as there's a nut spacer going to the water pump. It...

Suddenly getting a metallic noise from the transfer case shifter. Check out the video below. I can even feel a corresponding vibration on the TC shifter when I hear it. Checked both the TC and transmission oil and I'm good. Thoughts?

Still looking for a good one piece hood suitable for a 73 that isn't rotted out. Thanks.

Free for the taking. It’s a rear mount (under trunk floor) secondary fuel tank. I removed from my truck as it wasn’t used. Free. It’s heavy so shipping might not be wise. Prefer local pickup or I can meet/drop in Reno as well.